Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing
Materials · 04.04.2023 · 16 (7) · 2861
DOI: 10.3390/ma16072861 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.04.2023. Verfasst von Jianqin Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Project of State Key Laboratory of Explosion Science and Technology, Natural Science Foundation of Anhui Province.
Abstract (Originalsprache)
Direct-ink-writing (DIW)-based 3D-printing technology combined with the direct-foaming method provides a new strategy for the fabrication of porous materials. We herein report a novel method of preparing porous SiC ceramics using the DIW process and investigate their mechanical and wave absorption properties. We investigated the effects of nozzle diameter on the macroscopic shape and microstructure of the DIW SiC green bodies. Subsequently, the influences of the sintering temperature on the mechanical properties and electromagnetic (EM) wave absorption performance of the final porous SiC-sintered ceramics were also studied. The results showed that the nozzle diameter played an important role in maintaining the structure of the SiC green part. The printed products contained large amounts of closed pores with diameters of approximately 100–200 μm. As the sintering temperature increased, the porosity of porous SiC-sintered ceramics decreased while the compressive strength increased. The maximum open porosity and compressive strength were 65.4% and 7.9 MPa, respectively. The minimum reflection loss (RL) was −48.9 dB, and the maximum effective absorption bandwidth (EAB) value was 3.7 GHz. Notably, porous SiC ceramics after sintering at 1650 °C could meet the application requirements with a compressive strength of 7.9 MPa, a minimum RL of −27.1 dB, and an EAB value of 3.4 GHz. This study demonstrated the potential of direct foaming combined with DIW-based 3D printing to prepare porous SiC ceramics for high strength and excellent EM wave absorption applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China.
- Anhui Key Laboratory of High-Performance Non-Ferrous Metal Materials, Anhui Polytechnic University, Wuhu 241000, China.
Förderung
- National Natural Science Foundation of China
- Open Project of State Key Laboratory of Explosion Science and Technology
- Natural Science Foundation of Anhui Province
- Talent Project of Anhui Province
- Open Project of the State Key Laboratory of Explosion Science and Technology
Zitieren
APA
Wu, J., Zhang, L., Wang, W., Su, R., Gao, X., Li, S., Wang, G., & He, R. (2023). Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing. Materials, 16(7), 2861. https://doi.org/10.3390/ma16072861
Vancouver
Wu J, Zhang L, Wang W, Su R, Gao X, Li S, et al. Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing. Materials. 2023;16(7):2861. doi:10.3390/ma16072861
BibTeX
@article{Wu2023,
author = {Wu, Jianqin and Zhang, Lu and Wang, Wenqing and Su, Ruyue and Gao, Xiong and Li, Suwen and Wang, Gang and He, Rujie},
title = {Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing},
journal = {Materials},
year = {2023},
volume = {16},
number = {7},
pages = {2861},
doi = {10.3390/ma16072861}
}
EUVIMED