EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Direct Ink Writing 3D Printing of Anisotropic Superhydrophobic/Superelastic Porous Silicone Rubber for Recyclable Dichloromethane Absorption

Longtao Ge, Zhoukun He, Lin Deng, Zhijun Wang, Qiang Guo, David Hui, Wei Feng iD, Qingyuan Wang, Xiaorong Lan iD, Jiayan Mao

Polymers · 02.11.2026 · 18 (21) · 2714

DOI: 10.3390/polym18212714 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.11.2026. Verfasst von Longtao Ge und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Chengdu University, Chengdu 610106, China. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Science and Technology Program, Stomatology Key Program of Southwest Medical University in 2024, Capacity Enhancement Grant for the Supervisor Team of the School of Stomatology of Southwest Medical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Special wettability on biological surfaces generally arises from the synergy between hierarchical microstructures and surface chemistry, providing inspiration for biomimetic superhydrophobic materials. However, conventional fabrication strategies often involve complex procedures or expensive molds, limiting the precise construction of ordered microstructures. Herein, direct ink writing (DIW) 3D printing was used to fabricate polydimethylsiloxane (PDMS)-based porous silicone rubber with integrated anisotropic surface wettability (ASW), superhydrophobicity, superelasticity, and dichloromethane (DCM) absorption performance. By regulating printing speed, pneumatic pressure, and nozzle angle, porous silicone rubber with well-defined anisotropic microstructures was constructed. The DIW-printed porous silicone rubber exhibited pronounced ASW and superhydrophobicity. The material maintained structural integrity under compressive strain and rapidly recovered its original shape after unloading. After 1000 cycles of tensile and compressive loading, the tensile strength decreased while the compressive strength showed no significant degradation, demonstrating excellent superelasticity and low energy dissipation. The DIW sample showed faster DCM uptake within 30 min, compared with conventional hot-pressed PDMS materials, whereas the equilibrium adsorption capacities of both materials after one day of exposure were comparable. Meanwhile, the DIW sample exhibited excellent stability during cyclic DCM absorption. In addition, the material maintained stable DCM absorption performance under contaminated conditions and at different temperatures. This study provides a new strategy for fabricating multifunctional intelligent porous elastomers via 3D printing, and the prepared material shows possible applications in DCM–water separation and potential applications in waterproof materials and porous biomedical materials.

Schlagwörter

Stichwörter der Autor:innen

3D printingDCM absorptionanisotropic surface wettabilitypolydimethylsiloxaneporous structuresilicone rubbersuperhydrophobic

Autor:innen und Institutionen

  • School of Mechanical Engineering, Chengdu University, Chengdu 610106, China.
  • Institute for Advanced Study, Research Center of Composites & Surface and Interface Engineering, Chengdu University, Chengdu 610106, China.
  • Luzhou Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration, The Affiliated Stomatological Hospital, Southwest Medical University, Luzhou 646000, China.
  • Institute of Stomatology, Southwest Medical University, Luzhou 646000, China.
  • Department of Mechanical Engineering, LSU New Orleans, New Orleans, LA 70148, USA.
  • Failure Mechanics and Engineering Disaster Prevention Key Laboratory of Sichuan Province, Sichuan University, Chengdu 610065, China.

ORCID-Profile: Wei Feng, Xiaorong Lan

Förderung

  • Sichuan Science and Technology Program
  • Stomatology Key Program of Southwest Medical University in 2024
  • Capacity Enhancement Grant for the Supervisor Team of the School of Stomatology of Southwest Medical University
  • Talent Introduction Program of The Affiliated Stomatological Hospital of Southwest Medical University
  • Innovative Leading Talents Program of The Affiliated Stomatological Hospital of Southwest Medical University
  • Affiliated Stomatological Hospital of Southwest Medical University

Zitieren

APA

Ge, L., He, Z., Deng, L., Wang, Z., Guo, Q., Hui, D., Feng, W., Wang, Q., Lan, X., & Mao, J. (2026). Direct Ink Writing 3D Printing of Anisotropic Superhydrophobic/Superelastic Porous Silicone Rubber for Recyclable Dichloromethane Absorption. Polymers, 18(21), 2714. https://doi.org/10.3390/polym18212714

Vancouver

Ge L, He Z, Deng L, Wang Z, Guo Q, Hui D, et al. Direct Ink Writing 3D Printing of Anisotropic Superhydrophobic/Superelastic Porous Silicone Rubber for Recyclable Dichloromethane Absorption. Polymers. 2026;18(21):2714. doi:10.3390/polym18212714

BibTeX
@article{Ge2026,
  author = {Ge, Longtao and He, Zhoukun and Deng, Lin and Wang, Zhijun and Guo, Qiang and Hui, David and Feng, Wei and Wang, Qingyuan and Lan, Xiaorong and Mao, Jiayan},
  title = {Direct Ink Writing 3D Printing of Anisotropic Superhydrophobic/Superelastic Porous Silicone Rubber for Recyclable Dichloromethane Absorption},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2714},
  doi = {10.3390/polym18212714}
}
Kostenlos starten →