EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions

Lavinia Tonelli iD, Erica Liverani iD, Gianluca Di Egidio iD, Alessandro Fortunato iD, Alessandro Morri iD, Lorella Ceschini iD

Materials · 29.03.2023 · 16 (7) · 2721

DOI: 10.3390/ma16072721 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.03.2023. Verfasst von Lavinia Tonelli und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering (DIN), Alma Mater Studiorum-University of Bologna, Viale del Risorgimento 2, 40136 Bologna, Italy. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union - NextGenerationEU, European Union-NextGenerationEU, Italian Ministry of University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive processes like Laser Beam Powder Bed Fusion (PBF-LB) result in a distinctive microstructure characterized by metastability, supersaturation, and finesse. Post-process heat treatments modify microstructural features and tune mechanical behavior. However, the exposition at high temperatures can induce changes in the microstructure. Therefore, the present work focuses on the analyses of the tensile response at room and high (200 °C) temperature of the A357 (AlSi7Mg0.6) alloy processed by PBF-LB and subjected to tailored T5 (direct aging) and T6R (rapid solution treatment, quenching, and aging) treatments. Along with the effect of microstructural features in the as-built T5 and T6R alloy, the role of typical process-related defects is also considered. In this view, the structural integrity of the alloy is evaluated by a deep analysis of the work-hardening behavior, and quality indexes have been compared. Results show that T5 increases tensile strength at room temperature without compromising ductility. T6R homogenizes the microstructure and enhances the structural integrity by reducing the detrimental effect of defects, resulting in the best trade-off between strength and ductility. At 200 °C, tensile properties are comparable, but if resilience and toughness moduli are considered, as-built and T5 alloys show the best overall mechanical performance.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingaluminum alloysheat treatmentmechanical propertiesmicrostructurestructural integrity

Autor:innen und Institutionen

  • Department of Industrial Engineering (DIN), Alma Mater Studiorum-University of Bologna, Viale del Risorgimento 2, 40136 Bologna, Italy.

ORCID-Profile: Lavinia Tonelli, Erica Liverani, Gianluca Di Egidio, Alessandro Fortunato, Alessandro Morri, Lorella Ceschini

Förderung

  • European Union - NextGenerationEU
  • European Union-NextGenerationEU
  • Italian Ministry of University
  • National Recovery and Resilience Plan (NRRP)

Zitieren

APA

Tonelli, L., Liverani, E., Di Egidio, G., Fortunato, A., Morri, A., & Ceschini, L. (2023). On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions. Materials, 16(7), 2721. https://doi.org/10.3390/ma16072721

Vancouver

Tonelli L, Liverani E, Di Egidio G, Fortunato A, Morri A, Ceschini L. On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions. Materials. 2023;16(7):2721. doi:10.3390/ma16072721

BibTeX
@article{Tonelli2023,
  author = {Tonelli, Lavinia and Liverani, Erica and Di Egidio, Gianluca and Fortunato, Alessandro and Morri, Alessandro and Ceschini, Lorella},
  title = {On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2721},
  doi = {10.3390/ma16072721}
}
Kostenlos starten →