EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Room and High-Temperature Mechanical Properties of As-Built PBF-LB W360 Hot Forming Steel Alloy

Morgane Mokhtari, Robin Guillon, Fábio J. P. Simões, Tiago Marques, Artur Mateus, Yannick Balcaen, Joël Alexis

Alloys · 24.07.2026 · 5 (3) · 16

DOI: 10.3390/alloys5030016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Alloys, online erschienen am 24.07.2026. Verfasst von Morgane Mokhtari und 6 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Interreg-SUDOE Program, Fundação para a Cieência e a Tecnologia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To produce increasingly efficient tools with optimized geometry, additive manufacturing is a suitable solution. However, tool steels, due to their high amount of carbon and hardening elements, may be unweldable and therefore difficult to produce using additive manufacturing methods that employ melting. W360 is a hot-forming alloy, and, in this study, it was produced through laser powder bed fusion (PBF-LB). The microstructure and mechanical properties were evaluated on as-built netshape PBF-LB samples. Despite the presence of many alloying elements, this alloy was not sensitive to cracks, and very good results from the defect analysis (defect surface density < 0.2%) were achieved. Microstructure and hardness are homogeneous in the sample except in the last layer due to an upskin effect. As-built netshape samples exhibit very promising mechanical properties up to 400 °C, which could be further improved by heat treatments.

Förderung

  • Interreg-SUDOE Program
  • Fundação para a Cieência e a Tecnologia

Zitieren

APA

Mokhtari, M., Guillon, R., Simões, F. J. P., Marques, T., Mateus, A., Balcaen, Y., & Alexis, J. (2026). Microstructure, Room and High-Temperature Mechanical Properties of As-Built PBF-LB W360 Hot Forming Steel Alloy. Alloys, 5(3), 16. https://doi.org/10.3390/alloys5030016

Vancouver

Mokhtari M, Guillon R, Simões FJP, Marques T, Mateus A, Balcaen Y, et al. Microstructure, Room and High-Temperature Mechanical Properties of As-Built PBF-LB W360 Hot Forming Steel Alloy. Alloys. 2026;5(3):16. doi:10.3390/alloys5030016

BibTeX
@article{Mokhtari2026,
  author = {Mokhtari, Morgane and Guillon, Robin and Simões, Fábio J. P. and Marques, Tiago and Mateus, Artur and Balcaen, Yannick and Alexis, Joël},
  title = {Microstructure, Room and High-Temperature Mechanical Properties of As-Built PBF-LB W360 Hot Forming Steel Alloy},
  journal = {Alloys},
  year = {2026},
  volume = {5},
  number = {3},
  pages = {16},
  doi = {10.3390/alloys5030016}
}
Kostenlos starten →