A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
Materials · 27.03.2023 · 16 (7) · 2661
DOI: 10.3390/ma16072661 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 27.03.2023. Verfasst von Hao Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, School of Engineering, University of Michigan, Ann Arbor, MI 48109, USA. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 184 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Extrusion-based 3D concrete printing (E3DCP) has been appreciated by academia and industry as the most plausible candidate for prospective concrete constructions. Considerable research efforts are dedicated to the material design to improve the extrudability of fresh concrete. However, at the time of writing this paper, there is still a lack of a review paper that highlights the significance of the mechanical design of the E3DCP system. This paper provides a comprehensive review of the mechanical design of the E3DCP extruder system in terms of the extruder system, positioning system and advanced fittings, and their effects on the extrudability are also discussed by relating to the extrusion driving forces and extrusion resistive forces which may include chamber wall shear force, shaping force, nozzle wall shear force, dead zone shear force and layer pressing force. Moreover, a classification framework of the E3DCP system as an extension of the DFC classification framework was proposed. The authors reckoned that such a classification framework could assist a more systematic E3DCP system design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, School of Engineering, University of Michigan, Ann Arbor, MI 48109, USA.
- Department of Civil Engineering, School of Engineering, Tsinghua University, Beijing 100190, China.
- Department of Architecture and Built Environment, School of Engineering, University of Nottingham, Nottingham NG7 2RD, UK.
- Department of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester M13 9PL, UK.
- Institut de Recherche Dupuy de Lôme, Université Bretagne Sud, 56100 Lorient, France.
ORCID-Profile: Hao Chen, Ning Li, Arnaud Perrot
Zitieren
APA
Chen, H., Zhang, D., Chen, P., Li, N., & Perrot, A. (2023). A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing. Materials, 16(7), 2661. https://doi.org/10.3390/ma16072661
Vancouver
Chen H, Zhang D, Chen P, Li N, Perrot A. A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing. Materials. 2023;16(7):2661. doi:10.3390/ma16072661
BibTeX
@article{Chen2023,
author = {Chen, Hao and Zhang, Daobo and Chen, Peng and Li, Ning and Perrot, Arnaud},
title = {A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing},
journal = {Materials},
year = {2023},
volume = {16},
number = {7},
pages = {2661},
doi = {10.3390/ma16072661}
}
EUVIMED