Microstructure and Mechanical Properties of Y4Zr3O12-Added Fe–13.5Cr–2W Oxide-Dispersion-Strengthened Steels, Containing High Contents of C and N, Prepared by Mechanical Alloying and Two-Step Spark Plasma Sintering
Materials · 18.03.2023 · 16 (6) · 2433
DOI: 10.3390/ma16062433 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.03.2023. Verfasst von Yiheng Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: International Partnership Program of Chinese Academy of Sciences.
Abstract (Originalsprache)
Oxide-dispersion-strengthened (ODS) steel is considered as a promising candidate structural material for nuclear applications. In this study, the microstructure and mechanical properties of Y4Zr3O12-added Fe–13.5Cr–2W ODS steels, containing high contents of C and N, prepared by mechanical alloying (MA) and two-step spark plasma sintering (SPS), were investigated. The results showed that pure Y4Zr3O12 powders, with a grain size of 3.5 nm, were well prepared with NH3·H2O addition by the sol-gel method in advance, in order to avoid the formation of some coarse or undesired oxides. W was completely dissolved into the matrix after 48 h of ball milling at 300 rpm, and the main elements were uniformly distributed on the surface of the milled powders. The unexpected face-centered cubic (FCC, γ)/body-centered cubic (BCC, α) dual-phase structure of the sintered specimens, could be explained by the unexpectedly high contents of C and N from the raw powder production process, fast-sintering characteristic of SPS, and inhibitory effect of W on the diffusion of C. The experimental results were approximately consistent with the simulation results from the Thermo Calc software. The temperature combination of 800 °C and 1100 °C during the SPS process, provided a relatively more homogeneous microstructure, while the combination of 750 °C and 1150 °C, provided the highest ultimate tensile strength (UTS), of 1038 MPa, with the highest uniform elongation (UE), of 6.2%. M23C6, Cr2O3, M2(C,N), and other precipitates, were mainly distributed at grain boundaries, especially at the triple junctions, which led to Cr depletion at grain boundaries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China.
- University of Science and Technology of China, Hefei 230026, China.
- School of Materials Science and Engineering, Central South University, Changsha 410083, China.
- National Institute for Fusion Science, Toki 509-5292, Japan.
ORCID-Profile: Yiheng Wu
Förderung
- International Partnership Program of Chinese Academy of Sciences
Zitieren
APA
Wu, Y., Huang, Q., Zhang, L., Jiang, Y., Zhu, G., & Shen, J. (2023). Microstructure and Mechanical Properties of Y4Zr3O12-Added Fe–13.5Cr–2W Oxide-Dispersion-Strengthened Steels, Containing High Contents of C and N, Prepared by Mechanical Alloying and Two-Step Spark Plasma Sintering. Materials, 16(6), 2433. https://doi.org/10.3390/ma16062433
Vancouver
Wu Y, Huang Q, Zhang L, Jiang Y, Zhu G, Shen J. Microstructure and Mechanical Properties of Y4Zr3O12-Added Fe–13.5Cr–2W Oxide-Dispersion-Strengthened Steels, Containing High Contents of C and N, Prepared by Mechanical Alloying and Two-Step Spark Plasma Sintering. Materials. 2023;16(6):2433. doi:10.3390/ma16062433
BibTeX
@article{Wu2023,
author = {Wu, Yiheng and Huang, Qunying and Zhang, Ligang and Jiang, Yong and Zhu, Gaofan and Shen, Jingjie},
title = {Microstructure and Mechanical Properties of Y4Zr3O12-Added Fe–13.5Cr–2W Oxide-Dispersion-Strengthened Steels, Containing High Contents of C and N, Prepared by Mechanical Alloying and Two-Step Spark Plasma Sintering},
journal = {Materials},
year = {2023},
volume = {16},
number = {6},
pages = {2433},
doi = {10.3390/ma16062433}
}
EUVIMED