CoxCrFeNiTi High-Entropy Alloys Prepared via Mechanical Alloying and Spark Plasma Sintering for Magnetron Sputtering Coatings
Materials · 24.09.2023 · 16 (19) · 6386
DOI: 10.3390/ma16196386 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.09.2023. Verfasst von Ciprian Alexandru Manea und 8 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for R&D in Electrical Engineering ICPE-CA Bucharest, Splaiul Unirii 313, 030138 Bucharest, Romania. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “POC” PROGRAM, Axis 1, PFE.
Abstract (Originalsprache)
The main objective of this study was to develop a high-entropy alloy (HEA) derived from the CoxCrFeNiTi HEA system (x = 0.5, 1) for protective coatings using the magnetron sputtering method. In order to produce the high-entropy alloy targets required for the magnetron sputtering process, mechanically alloyed metallic powders were consolidated via spark plasma sintering (SPS). The microstructural analysis results of the HEA mixture presented morphology changes after 30 h of alloying, with the particles presenting uniform polygonal shapes and dimensions. Subsequently, 316L stainless steel (SS) specimens were coated via magnetron sputtering, comparing their composition with that of the sputtering targets used for deposition to establish stoichiometry. Microstructural analyses of the SPSed HEAs revealed no defects and indicated a uniform elemental distribution across the surface. Furthermore, the CoCrFeNiTi equiatomic alloy exhibited a nearly stoichiometric composition, both in the coating and the sputtering target. The XRD analysis results indicated that amorphous coatings were obtained for both Co0.5CrFeNiTi and the CoCrFeNiTi HEA, and nanoindentation tests indicated that the CoCrFeNiTi HEA coating presented a hardness of 596 ± 22 HV, compared to the 570 ± 19 HV measured for Co0.5CrFeNiTi, suggesting an improved wear resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Institute for R&D in Electrical Engineering ICPE-CA Bucharest, Splaiul Unirii 313, 030138 Bucharest, Romania.
- Material Science and Engineering Faculty, University Politehnica Bucharest, Splaiul Independentei 313, 060042 Bucharest, Romania.
- APEL LASER.SRL, Str. Vanatorilor 25, 077135 Mogosoaia, Romania.
ORCID-Profile: Ciprian Alexandru Manea, Laura Elena Geambazu, Delia Pătroi, Radu Mihail Udrea, Magdalena Valentina Lungu
Förderung
- “POC” PROGRAM, Axis 1
- PFE
Zitieren
APA
Manea, C. A., Geambazu, L. E., Tălpeanu, D., Marinescu, V., Sbârcea, G. B., Pătroi, D., Udrea, R. M., Lungu, M. V., & Lucaci, M. (2023). CoxCrFeNiTi High-Entropy Alloys Prepared via Mechanical Alloying and Spark Plasma Sintering for Magnetron Sputtering Coatings. Materials, 16(19), 6386. https://doi.org/10.3390/ma16196386
Vancouver
Manea CA, Geambazu LE, Tălpeanu D, Marinescu V, Sbârcea GB, Pătroi D, et al. CoxCrFeNiTi High-Entropy Alloys Prepared via Mechanical Alloying and Spark Plasma Sintering for Magnetron Sputtering Coatings. Materials. 2023;16(19):6386. doi:10.3390/ma16196386
BibTeX
@article{Manea2023,
author = {Manea, Ciprian Alexandru and Geambazu, Laura Elena and Tălpeanu, Dorinel and Marinescu, Virgil and Sbârcea, Gabriela Beatrice and Pătroi, Delia and Udrea, Radu Mihail and Lungu, Magdalena Valentina and Lucaci, Mariana},
title = {CoxCrFeNiTi High-Entropy Alloys Prepared via Mechanical Alloying and Spark Plasma Sintering for Magnetron Sputtering Coatings},
journal = {Materials},
year = {2023},
volume = {16},
number = {19},
pages = {6386},
doi = {10.3390/ma16196386}
}
EUVIMED