EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Selection Route of Precursor Materials in 3D Printing Composite Filament Development for Biomedical Applications

Aura-Cătălina Mocanu iD, Florin Miculescu iD, Andreea Elena Constantinescu iD, Mădălina-Andreea Pandele, Ștefan Ioan Voicu iD, Anișoara Cîmpean iD, Marian Miculescu iD, Andreea Mariana Negrescu iD

Materials · 15.03.2023 · 16 (6) · 2359

DOI: 10.3390/ma16062359 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.03.2023. Verfasst von Aura-Cătălina Mocanu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallic Materials Science, Physical Metallurgy, University Politehnica of Bucharest, 313 Splaiul Independentei, J Building, District 6…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Unitatea Executiva Pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii, National Authority for Scientific Research, CNCS—UEFISCDI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing or 3D printing technologies might advance the fabrication sector of personalised biomaterials with high-tech precision. The selection of optimal precursor materials is considered the first key-step for the development of new printable filaments destined for the fabrication of products with diverse orthopaedic/dental applications. The selection route of precursor materials proposed in this study targeted two categories of materials: prime materials, for the polymeric matrix (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA)); and reinforcement materials (natural hydroxyapatite (HA) and graphene nanoplatelets (GNP) of different dimensions). HA was isolated from bovine bones (HA particles size < 40 μm, 125 μm) through a reproducible synthesis technology. The structural (FTIR-ATR, Raman spectroscopy), morphological (SEM), and, most importantly, in vitro (indirect and direct contact studies) features of all precursor materials were comparatively evaluated. The polymeric materials were also prepared in the form of thin plates, for an advanced cell viability assessment (direct contact studies). The overall results confirmed once again the reproducibility of the HA synthesis method. Moreover, the biological cytotoxicity assays established the safe selection of PLA as a future polymeric matrix, with GNP of grade M as a reinforcement and HA as a bioceramic. Therefore, the obtained results pinpointed these materials as optimal for future composite filament synthesis and the 3D printing of implantable structures.

Schlagwörter

Stichwörter der Autor:innen

3D printingABSGNPPLAin vitro testingmaterials selectionnatural HA

Autor:innen und Institutionen

  • Department of Metallic Materials Science, Physical Metallurgy, University Politehnica of Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.
  • Department of Analytical Chemistry and Environmental Engineering, University Politehnica of Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania.
  • Advanced Polymer Materials Group, University Politehnica of Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania.
  • Department of Biochemistry and Molecular Biology, University of Bucharest, 91-95 Splaiul Independentei, District 5, 050095 Bucharest, Romania.

ORCID-Profile: Aura-Cătălina Mocanu, Florin Miculescu, Andreea Elena Constantinescu, Ștefan Ioan Voicu, Anișoara Cîmpean, Marian Miculescu, Andreea Mariana Negrescu

Förderung

  • Unitatea Executiva Pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii
  • National Authority for Scientific Research
  • CNCS—UEFISCDI

Zitieren

APA

Mocanu, A. C., Miculescu, F., Constantinescu, A. E., Pandele, M. A., Voicu, Ș. I., Cîmpean, A., Miculescu, M., & Negrescu, A. M. (2023). Selection Route of Precursor Materials in 3D Printing Composite Filament Development for Biomedical Applications. Materials, 16(6), 2359. https://doi.org/10.3390/ma16062359

Vancouver

Mocanu AC, Miculescu F, Constantinescu AE, Pandele MA, Voicu ȘI, Cîmpean A, et al. Selection Route of Precursor Materials in 3D Printing Composite Filament Development for Biomedical Applications. Materials. 2023;16(6):2359. doi:10.3390/ma16062359

BibTeX
@article{Mocanu2023,
  author = {Mocanu, Aura-Cătălina and Miculescu, Florin and Constantinescu, Andreea Elena and Pandele, Mădălina-Andreea and Voicu, Ștefan Ioan and Cîmpean, Anișoara and Miculescu, Marian and Negrescu, Andreea Mariana},
  title = {Selection Route of Precursor Materials in 3D Printing Composite Filament Development for Biomedical Applications},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2359},
  doi = {10.3390/ma16062359}
}
Kostenlos starten →