EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Heat Input on the Microstructure and Mechanical Properties of Local Dry Underwater Welded Duplex Stainless Steel

Yu Hu, Yonghua Shi iD, Kai Wang, Jiqiang Huang

Materials · 13.03.2023 · 16 (6) · 2289

DOI: 10.3390/ma16062289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.03.2023. Verfasst von Yu Hu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering and Automation, Foshan University, Foshan 528231, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research, Guangdong University Teachers' Characteristic Innovation Research Project, Foshan Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Duplex stainless steel welded metals were underwater local dry prepared on S32101 lean duplex stainless steel trapezoidal groove plates with a self-made drain cover employing Supercore 2205P flux-cored filler wire. Different heat inputs were employed to investigate the effects on mechanical characteristics and the microstructure of welded metals. The results demonstrated that as the heat was applied, austenite concentrations in the weld metals increased. It was found that the austenite concentration and the fraction of Σ3-austenite twin-grain boundaries followed the same trends. With increasing heat input, the recrystallized ferrite and austenite grains initially decreased and subsequently increased, whereas the fraction of interphase boundaries between special ferrite and austenite exhibited the reverse trend. With a heat input of 1.4 kJ/mm, the toughness and plasticity of the weld metals were enhanced by an increase in austenite content, Σ3 recrystallized grains, and austenite twin-grain boundaries. The plasticity and tensile strength values of the welded metal changed more when the heat input was raised from 1.0 to 1.2 kJ/mm than when it was raised from 1.2 to 1.4 kJ/mm. Considering energy conservation, it is recommended to adopt 1.2 kJ/mm for welding heat input.

Schlagwörter

Stichwörter der Autor:innen

duplex stainless steelflux-cored arc weldinglocal dry underwater weldingmechanical performancemicrostructure

Autor:innen und Institutionen

  • School of Mechatronic Engineering and Automation, Foshan University, Foshan 528231, China.
  • School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China.
  • School of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102627, China.

ORCID-Profile: Yonghua Shi

Förderung

  • Guangdong Basic and Applied Basic Research
  • Guangdong University Teachers' Characteristic Innovation Research Project
  • Foshan Technology Project
  • Guangdong University Teachers’ Characteristic Innovation Research Project
  • Guangdong Basic and Applied Basic Research Foundation

Zitieren

APA

Hu, Y., Shi, Y., Wang, K., & Huang, J. (2023). Effect of Heat Input on the Microstructure and Mechanical Properties of Local Dry Underwater Welded Duplex Stainless Steel. Materials, 16(6), 2289. https://doi.org/10.3390/ma16062289

Vancouver

Hu Y, Shi Y, Wang K, Huang J. Effect of Heat Input on the Microstructure and Mechanical Properties of Local Dry Underwater Welded Duplex Stainless Steel. Materials. 2023;16(6):2289. doi:10.3390/ma16062289

BibTeX
@article{Hu2023,
  author = {Hu, Yu and Shi, Yonghua and Wang, Kai and Huang, Jiqiang},
  title = {Effect of Heat Input on the Microstructure and Mechanical Properties of Local Dry Underwater Welded Duplex Stainless Steel},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2289},
  doi = {10.3390/ma16062289}
}
Kostenlos starten →