EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Kerf Quality Characteristics of Kevlar Fiber-Reinforced Polymers Cut by Abrasive Water Jet

Dinu-Valentin Gubencu iD, Carmen Opriș iD, Adelina-Alina Han

Materials · 08.03.2023 · 16 (6) · 2182

DOI: 10.3390/ma16062182 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.03.2023. Verfasst von Dinu-Valentin Gubencu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Faculty, Politehnica University of Timisoara, 300222 Timisoara, Romania. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Abrasive water jet machining has become an indispensable process for cutting Kevlar fiber-reinforced polymers used in applications such as ballistics protection, race cars, and protective gloves. The complex and diffuse action of a large number of input parameters leads to the need to evaluate the quality characteristics of the technological transformation as a result of the deployment of experimental studies adapted to the specific processing conditions. Thus, the paper focuses on identifying the influence of different factors and modeling their action on the characteristics that define the quality of the cut parts, such as the kerf taper angle and the Ra roughness parameter, by applying statistical methods of design and analysis of experiments.

Schlagwörter

Stichwörter der Autor:innen

Kevlar fiber-reinforced polymersabrasive water jet cuttingfull factorial experimentkerf taper anglesurface roughness

Autor:innen und Institutionen

  • Mechanical Engineering Faculty, Politehnica University of Timisoara, 300222 Timisoara, Romania.

ORCID-Profile: Dinu-Valentin Gubencu, Carmen Opriș

Zitieren

APA

Gubencu, D. V., Opriș, C., & Han, A. A. (2023). Analysis of Kerf Quality Characteristics of Kevlar Fiber-Reinforced Polymers Cut by Abrasive Water Jet. Materials, 16(6), 2182. https://doi.org/10.3390/ma16062182

Vancouver

Gubencu DV, Opriș C, Han AA. Analysis of Kerf Quality Characteristics of Kevlar Fiber-Reinforced Polymers Cut by Abrasive Water Jet. Materials. 2023;16(6):2182. doi:10.3390/ma16062182

BibTeX
@article{Gubencu2023,
  author = {Gubencu, Dinu-Valentin and Opriș, Carmen and Han, Adelina-Alina},
  title = {Analysis of Kerf Quality Characteristics of Kevlar Fiber-Reinforced Polymers Cut by Abrasive Water Jet},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2182},
  doi = {10.3390/ma16062182}
}
Kostenlos starten →