EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Wear and Mechanical Properties of Titanium Diboride-Reinforced Titanium Matrix Composites Prepared by Spark Plasma Sintering

Olusoji Oluremi Ayodele iD, Bukola Joseph Babalola iD, Peter Apata Olubambi

Materials · 03.03.2023 · 16 (5) · 2078

DOI: 10.3390/ma16052078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.03.2023. Verfasst von Olusoji Oluremi Ayodele und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Nanoengineering and Tribocorrosion, School of Mining, Metallurgy and Chemical Engineering, University of Johannesburg, Johannesburg 2028, …. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Johannesburg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synthesis of x-wt.% (where x = 2.5, 5, 7.5, and 10) TiB2-reinforced titanium matrix was accomplished through the spark plasma sintering technique (SPS). The sintered bulk samples were characterized, and their mechanical properties were evaluated. Near full density was attained, with the sintered sample having the least relative density of 97.5%. This indicates that the SPS process aids good sinterability. The Vickers hardness of the consolidated samples improved from 188.1 HV1 to 304.8 HV1, attributed to the high hardness of the TiB2. The tensile strength and elongation of the sintered samples decreased with increasing TiB2 content. The nano hardness and reduced elastic modulus of the consolidated samples were upgraded due to the addition of TiB2, with the Ti-7.5 wt.% TiB2 sample showing the maximum values of 9841 MPa and 188 GPa, respectively. The microstructures display the dispersion of whiskers and in-situ particles, and the X-ray diffraction analysis (XRD) showed new phases. Furthermore, the presence of TiB2 particles in the composites enhanced better wear resistance than the unreinforced Ti sample. Due to dimples and large cracks, ductile and brittle fracture behavior was noticed in the sintered composites.

Schlagwörter

Stichwörter der Autor:innen

ceramic reinforcementmicrostructuresnanomechanical propertiestensile behaviortitanium alloytribology

Autor:innen und Institutionen

  • Centre for Nanoengineering and Tribocorrosion, School of Mining, Metallurgy and Chemical Engineering, University of Johannesburg, Johannesburg 2028, South Africa.

ORCID-Profile: Olusoji Oluremi Ayodele, Bukola Joseph Babalola

Förderung

  • University of Johannesburg

Zitieren

APA

Ayodele, O. O., Babalola, B. J., & Olubambi, P. A. (2023). Evaluation of the Wear and Mechanical Properties of Titanium Diboride-Reinforced Titanium Matrix Composites Prepared by Spark Plasma Sintering. Materials, 16(5), 2078. https://doi.org/10.3390/ma16052078

Vancouver

Ayodele OO, Babalola BJ, Olubambi PA. Evaluation of the Wear and Mechanical Properties of Titanium Diboride-Reinforced Titanium Matrix Composites Prepared by Spark Plasma Sintering. Materials. 2023;16(5):2078. doi:10.3390/ma16052078

BibTeX
@article{Ayodele2023,
  author = {Ayodele, Olusoji Oluremi and Babalola, Bukola Joseph and Olubambi, Peter Apata},
  title = {Evaluation of the Wear and Mechanical Properties of Titanium Diboride-Reinforced Titanium Matrix Composites Prepared by Spark Plasma Sintering},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {2078},
  doi = {10.3390/ma16052078}
}
Kostenlos starten →