EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on the Pressure Mechanism Improvement of a Roller-Type Machine Working Bodies

Auezhan T Amanov iD, Gayrat A Bahadirov, Ayder M Nabiev iD

Materials · 27.02.2023 · 16 (5) · 1956

DOI: 10.3390/ma16051956 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.02.2023. Verfasst von Auezhan T Amanov und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sun Moon University, Asan 31460, Republic of Korea. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute for Advancement of Technology, Ministry of Education, Ministry of Trade, Industry and Energy (MOTIE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The parameters of the improved design of the pressure mechanism of a roller technological machine for squeezing wet materials are investigated in this article. The factors influencing the parameters of the pressure mechanism, which provide the required force between the working rolls of a technological machine during the processing of moisture-saturated fibrous materials, such as wet leather, were studied. The processed material is drawn in the vertical direction between the working rolls under their pressure. This study aimed to determine the parameters that make it possible to create the required pressure of the working rolls depending on the change in the thickness of the material being processed. A pressure mechanism of working rolls mounted on levers is proposed. In the design of the proposed device, the length of the levers does not change due to the movement of the sliders when turning the levers; this provides a horizontal direction of the sliders. The change in the pressure force of the working rolls is determined depending on the variation in the nip angle, the coefficient of friction, and other factors. Based on theoretical studies concerning the feed of the semi-finished leather product between the squeezing rolls, graphs were plotted, and conclusions were drawn. An experimental roller stand designated for pressing multi-layer leather semi-finished products has been developed and manufactured. An experiment was carried out to determine the factors affecting the technological process of squeezing excess moisture from wet semi-finished leather products with their multilayer package together with moisture-removing materials by means of their vertical supply on a base plate between rotating squeezing shafts also covered with moisture-removing materials. According to the results of the experiment, the optimal process parameters were selected. It is recommended to carry out the process of squeezing the moisture from two wet semi-finished leather products at a pass rate more than twice as high and with a pressing force of the working shafts two times lower compared to the analog. According to the results of the study, the optimal parameters for the process of squeezing the moisture from two layers of wet leather semi-finished products were chosen, namely the feed rate of 0.34 m/s and a pressing force of the squeezing rollers of 32 kN/m. The use of the proposed roller device allowed an increase of two times or more in the productivity of the process of processing wet leather semi-finished products on the basis of the proposed technique compared to known roller wringers.

Schlagwörter

Stichwörter der Autor:innen

leveragepressure mechanismprocessed materialroller machineworking rolls

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sun Moon University, Asan 31460, Republic of Korea.
  • Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent 100000, Uzbekistan.
  • Institute of Mechanics and Seismic Stability of Structures, Academy of Sciences of the Republic of Uzbekistan, Tashkent 100125, Uzbekistan.

ORCID-Profile: Auezhan T Amanov, Ayder M Nabiev

Förderung

  • Korea Institute for Advancement of Technology
  • Ministry of Education
  • Ministry of Trade, Industry and Energy (MOTIE)

Zitieren

APA

Amanov, A. T., Bahadirov, G. A., & Nabiev, A. M. (2023). A Study on the Pressure Mechanism Improvement of a Roller-Type Machine Working Bodies. Materials, 16(5), 1956. https://doi.org/10.3390/ma16051956

Vancouver

Amanov AT, Bahadirov GA, Nabiev AM. A Study on the Pressure Mechanism Improvement of a Roller-Type Machine Working Bodies. Materials. 2023;16(5):1956. doi:10.3390/ma16051956

BibTeX
@article{Amanov2023,
  author = {Amanov, Auezhan T and Bahadirov, Gayrat A and Nabiev, Ayder M},
  title = {A Study on the Pressure Mechanism Improvement of a Roller-Type Machine Working Bodies},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {1956},
  doi = {10.3390/ma16051956}
}
Kostenlos starten →