EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Failure Mechanism of a High-Density Polyethylene Liner in a Type IV High-Pressure Storage Tank

Alfredo Rondinella, Giovanni Capurso iD, Matteo Zanocco, Federico Basso, Chiara Calligaro, Davide Menotti, Alberto Agnoletti, Lorenzo Fedrizzi

Polymers · 12.03.2024 · 16 (6) · 779

DOI: 10.3390/polym16060779 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.03.2024. Verfasst von Alfredo Rondinella und 7 weiteren Autor:innen. Beteiligte Einrichtung: Polytechnic Department of Engineering and Architecture, University of Udine, Via del Cotonificio 108, 33100 Udine, Italy. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union - ESF REACT-EU, European Union - NextGenerationEU, European Union—ESF REACT-EU, PON Research and Innovation 2014–2020.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of Type IV cylinders for gas storage is becoming more widespread in various sectors, especially in transportation, owing to the lightweight nature of this type of cylinder, which is composed of a polymeric liner that exerts a barrier effect and an outer composite material shell that primarily imparts mechanical strength. In this work, the failure analysis of an HDPE liner in a Type IV cylinder for high-pressure storage was carried out. The breakdown occurred during a cyclic pressure test at room temperature and manifested in the hemispherical head area, as cracks perpendicular to the liner pinch-off line. The failed sample was thoroughly investigated and its characteristics were compared with those of other liners at different stages of production of a Type IV cylinder (blow molding, curing of the composite material). An examination of the liner showed that no significant chemical and morphological changes occurred during the production cycle of a Type IV cylinder that could justify the liner rupture, and that the most likely cause of failure was a design-related fatigue phenomenon.

Schlagwörter

Stichwörter der Autor:innen

HDPEfailure analysishigh-pressure storage tankspolymer degradation

Autor:innen und Institutionen

  • Polytechnic Department of Engineering and Architecture, University of Udine, Via del Cotonificio 108, 33100 Udine, Italy.
  • Department of Agricultural, Food, Environmental, and Animal Sciences, University of Udine, Via Sondrio 2/A, 33100 Udine, Italy.
  • Faber Industrie SpA, Via dell'Industria 64, 33043 Cividale del Friuli, Italy.

ORCID-Profile: Giovanni Capurso

Förderung

  • European Union - ESF REACT-EU
  • European Union - NextGenerationEU
  • European Union—ESF REACT-EU, PON Research and Innovation 2014–2020
  • European Union—NextGenerationEU

Zitieren

APA

Rondinella, A., Capurso, G., Zanocco, M., Basso, F., Calligaro, C., Menotti, D., Agnoletti, A., & Fedrizzi, L. (2024). Study of the Failure Mechanism of a High-Density Polyethylene Liner in a Type IV High-Pressure Storage Tank. Polymers, 16(6), 779. https://doi.org/10.3390/polym16060779

Vancouver

Rondinella A, Capurso G, Zanocco M, Basso F, Calligaro C, Menotti D, et al. Study of the Failure Mechanism of a High-Density Polyethylene Liner in a Type IV High-Pressure Storage Tank. Polymers. 2024;16(6):779. doi:10.3390/polym16060779

BibTeX
@article{Rondinella2024,
  author = {Rondinella, Alfredo and Capurso, Giovanni and Zanocco, Matteo and Basso, Federico and Calligaro, Chiara and Menotti, Davide and Agnoletti, Alberto and Fedrizzi, Lorenzo},
  title = {Study of the Failure Mechanism of a High-Density Polyethylene Liner in a Type IV High-Pressure Storage Tank},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {6},
  pages = {779},
  doi = {10.3390/polym16060779}
}
Kostenlos starten →