EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Optimization of Additively Manufactured (AM) Stainless Steel Components Using Combined Chemical and Electrochemical Post-Processing

Pablo Edilberto Sanchez Guerrero, Andrew Grizzle, Daniel Fulford, Juan Estevez Hernandez, Lucas Rice, Pawan Tyagi

Coatings · 11.10.2025 · 15 (10) · 1197

DOI: 10.3390/coatings15101197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 11.10.2025. Verfasst von Pablo Edilberto Sanchez Guerrero und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation-CREST Award, Department of Energy/National Nuclear Security Agency, NASA MUREP Institutional Research Opportunity Grant.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design and production of goods have been completely transformed by additive manufacturing (AM), which makes it possible to create components with intricate and complex geometries that were previously impossible or impractical to produce. However, current technologies continue to produce coarse-surfaced metal components that typically exhibit fatigue properties, resulting in component failure and unfavorable friction coefficients on the printed part. Therefore, to improve the surface quality of the fabricated parts, post-processing of AM-created components is required. With emphasis on electroless nickel plating, ChemPolishing (CP), and ElectroPolishing (EP), this study investigates post-processing methods for stainless steel that is additively manufactured (AM). The rough surfaces created by additive manufacturing (AM) restrict direct use. While ElectroPolishing (EP) achieves high material removal rates but may not be consistent, ChemPolishing (CP) offers uniform smoothening. Nickel plating enhances additive manufacturing (AM) products’ resistance to wear and scratches and corrosion protection. To optimize nickel deposition, medium (6%–9%) and high (10%–13%) phosphorus nickel was tested using the L9 Taguchi design of experiments (DOE). Mechanical properties, including scratch resistance and adhesion, were evaluated using the TABER 5900 reciprocating (Taber Industries, North Tonawanda, NY, USA) abraser apparatus, a 5 N scratch test, and ASTM B-733 thermal shock method. Surface analysis was performed with the KEYENCE VHX-7000 microscope (Keyence Corporation, Itasca, IL, USA), and chemical composition before and after nickel deposition was assessed via the ThermoFisher Phenom XL scanning electron microscope (SEM, Thermo Fisher Scientific, Waltham, MA, USA) Optimal processing conditions, determined using Qualitek-4 software, Version 20.1.0 revealed improvements in both surface finish and mechanical robustness. This comprehensive analysis underscores the potential of nickel-coated additive manufacturing (AM) parts for enhanced performance, offering a pathway to more durable and efficient additive manufacturing (AM) applications.

Förderung

  • National Science Foundation-CREST Award
  • Department of Energy/National Nuclear Security Agency
  • NASA MUREP Institutional Research Opportunity Grant
  • Honeywell Federal Manufacturing & Technologies, LLC.

Zitieren

APA

Guerrero, P. E. S., Grizzle, A., Fulford, D., Hernandez, J. E., Rice, L., & Tyagi, P. (2025). Surface Optimization of Additively Manufactured (AM) Stainless Steel Components Using Combined Chemical and Electrochemical Post-Processing. Coatings, 15(10), 1197. https://doi.org/10.3390/coatings15101197

Vancouver

Guerrero PES, Grizzle A, Fulford D, Hernandez JE, Rice L, Tyagi P. Surface Optimization of Additively Manufactured (AM) Stainless Steel Components Using Combined Chemical and Electrochemical Post-Processing. Coatings. 2025;15(10):1197. doi:10.3390/coatings15101197

BibTeX
@article{Guerrero2025,
  author = {Guerrero, Pablo Edilberto Sanchez and Grizzle, Andrew and Fulford, Daniel and Hernandez, Juan Estevez and Rice, Lucas and Tyagi, Pawan},
  title = {Surface Optimization of Additively Manufactured (AM) Stainless Steel Components Using Combined Chemical and Electrochemical Post-Processing},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {1197},
  doi = {10.3390/coatings15101197}
}
Kostenlos starten →