Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM
Materials · 16.02.2023 · 16 (4) · 1671
DOI: 10.3390/ma16041671 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2023. Verfasst von Anton Smirnov und 2 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of 3D Structural and Functional Engineering, Moscow State University of Technology "STANKIN", Vadkovsky per. 1, Moscow 127055, Russia. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.
Abstract (Originalsprache)
In this paper, a mathematical model for the description of the failure probability of filament and fused deposition modeling (FDM)-printed products is considered. The model is based on the results of tensile tests of filament samples made of polyacrylonitrile butadiene styrene (ABS), polylactide (PLA), and composite PLA filled with alumina (Al2O3) as well after FDM-printed products of “spatula” type. The application of probabilistic methods of fracture analysis revealed that the main contribution to the reduction of fracture probability is made by the elastic and plastic stages of the fracture curve under static loading. Particle distribution analysis of Al2O3 combined with fracture probability analysis shows that particle size distributions on the order of 10−5 and 10−6 mm decrease the fracture probability of the sample, whereas uniform particle size distributions on the order of 10−1 and 10−2 mm do not change the distribution probability. The paper shows that uneven distribution of Al2O3 fillers in composite samples made using FDM printing technology leads to brittle fracture of the samples.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of 3D Structural and Functional Engineering, Moscow State University of Technology "STANKIN", Vadkovsky per. 1, Moscow 127055, Russia.
- Spark Plasma Sintering Research Laboratory, Moscow State University of Technology "STANKIN", Vadkovsky per. 1, Moscow 127055, Russia.
- Scientific Department, A.I. Evdokimov Moscow State University of Medicine and Dentistry, Delegatskaya St., 20, p.1, Moscow 127473, Russia.
ORCID-Profile: Anton Smirnov, Pavel Peretyagin, Nikita Nikitin
Förderung
- Ministry of Science and Higher Education of the Russian Federation
Zitieren
APA
Smirnov, A., Peretyagin, P., & Nikitin, N. (2023). Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM. Materials, 16(4), 1671. https://doi.org/10.3390/ma16041671
Vancouver
Smirnov A, Peretyagin P, Nikitin N. Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM. Materials. 2023;16(4):1671. doi:10.3390/ma16041671
BibTeX
@article{Smirnov2023,
author = {Smirnov, Anton and Peretyagin, Pavel and Nikitin, Nikita},
title = {Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1671},
doi = {10.3390/ma16041671}
}
EUVIMED