EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization

Aleksander Ejsmont iD, Joanna Goscianska iD

Materials · 16.02.2023 · 16 (4) · 1641

DOI: 10.3390/ma16041641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2023. Verfasst von Aleksander Ejsmont und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemistry, Department of Chemical Technology, Adam Mickiewicz University, Uniwersytetu Poznańskiego 8, 61-614 Poznań, Poland. Die Arbeit wurde bisher 106-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zinc oxide, as a widely used material in optics, electronics, and medicine, requires a complete overview of different conditions for facile and easily reproducible syntheses. Two types of optimization of ZnO hydrothermal preparation from zinc acetate and sodium hydroxide solution are presented, which allowed for obtaining miscellaneous morphologies of materials. The first was a temperature-controlled synthesis from 100 to 200 °C, using citric acid as a capping agent. The formation of hexagonal rods at the lowest temperature was evidenced, which agglomerated to flower-like structures at 110 and 120 °C. It was followed by transformation to flake-like roses at 160 °C, up to disordered structures composed of nanosized plates (>180 °C). The transformations were generated through a temperature change, which had an impact on the diffusion effect of hydroxide and citrate complexes. The second optimization was the hydrothermal synthesis free of organic additives and it included only a pH variation from 7.5 to 13.5. It was found that by utilizing a slow-dropping process and varying amounts of NaOH solutions, it is possible to obtain well-formed hexagonal pellets at pH 8.0–8.5. Strongly basic conditions of pH 11.0 and 13.5 impeded superstructure formations, giving small elongated particles of ZnO. All samples were characterized by high phase purity and crystallinity, with a specific surface area of 18–37 m2/g, whereas particle size distribution indicated a predominance of small particles (

Schlagwörter

Stichwörter der Autor:innen

capping agentcitric acidmorphology controlparticles shapetunable microstructureszinc oxide

Autor:innen und Institutionen

  • Faculty of Chemistry, Department of Chemical Technology, Adam Mickiewicz University, Uniwersytetu Poznańskiego 8, 61-614 Poznań, Poland.

ORCID-Profile: Aleksander Ejsmont, Joanna Goscianska

Zitieren

APA

Ejsmont, A., & Goscianska, J. (2023). Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization. Materials, 16(4), 1641. https://doi.org/10.3390/ma16041641

Vancouver

Ejsmont A, Goscianska J. Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization. Materials. 2023;16(4):1641. doi:10.3390/ma16041641

BibTeX
@article{Ejsmont2023,
  author = {Ejsmont, Aleksander and Goscianska, Joanna},
  title = {Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1641},
  doi = {10.3390/ma16041641}
}
Kostenlos starten →