EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

ZnO Nanoparticles by Hydrothermal Method: Synthesis and Characterization

Juan Carlos Anaya-Zavaleta, Antonio Serguei Ledezma-Pérez, Carlos Gallardo-Vega, Joelis Rodríguez-Hernández, Carmen Natividad Alvarado-Canché, Perla Elvia García-Casillas, Arxel de León, Agustín Leobardo Herrera-May

Technologies · 01.01.2025 · 13 (1) · 18

DOI: 10.3390/technologies13010018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 01.01.2025. Verfasst von Juan Carlos Anaya-Zavaleta und 7 weiteren Autor:innen. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONAHCYT.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synthesis of reliable, cost-effective, and eco-friendly ZnO piezoelectric nanoparticles (NPs) can contribute to nanotechnology applications in electronics, sensors, and energy harvesting. Herein, ZnO NPs were synthesized using a hydrothermal method under varied reaction times and adding ammonium hydroxide, which provided an advantage of a low-cost, scalable, low-temperature, and environmentally friendly process. Characterization through UV–Vis spectroscopy revealed absorption peaks between 374 and 397 nm, showing a blue shift compared to bulk ZnO (400 nm) attributable to nanoscale dimensions. Transmission Electron Microscopy (TEM) analysis indicated particle dimensions with length and width ranges from 150 to 341 nm and from 83 to 120 nm, respectively. X-ray diffraction (XRD) confirmed high-crystalline quality, with crystallite sizes calculated using the Scherrer equation. In addition, the effective mass model provided an estimated band gap that matched with the reported data. Also, the lattice parameters, interplanar distances, and Zn-O bond lengths were consistent with Joint Committee on Powder Diffraction Standards (JCPDS). Finally, a ZnO NP film was deposited on a steel substrate, which generated a displacement of 150 nm under a square wave voltage of 10 V. The piezoelectric behavior of the synthesized ZnO NPs can be useful for fabrication of piezoelectric nanogenerators. The proposed synthesis can allow ZnO NPs with potential application in electronic devices, energy harvesters, and transducers.

Förderung

  • CONAHCYT

Zitieren

APA

Anaya-Zavaleta, J. C., Ledezma-Pérez, A. S., Gallardo-Vega, C., Rodríguez-Hernández, J., Alvarado-Canché, C. N., García-Casillas, P. E., León, A. D., & Herrera-May, A. L. (2025). ZnO Nanoparticles by Hydrothermal Method: Synthesis and Characterization. Technologies, 13(1), 18. https://doi.org/10.3390/technologies13010018

Vancouver

Anaya-Zavaleta JC, Ledezma-Pérez AS, Gallardo-Vega C, Rodríguez-Hernández J, Alvarado-Canché CN, García-Casillas PE, et al. ZnO Nanoparticles by Hydrothermal Method: Synthesis and Characterization. Technologies. 2025;13(1):18. doi:10.3390/technologies13010018

BibTeX
@article{AnayaZavaleta2025,
  author = {Anaya-Zavaleta, Juan Carlos and Ledezma-Pérez, Antonio Serguei and Gallardo-Vega, Carlos and Rodríguez-Hernández, Joelis and Alvarado-Canché, Carmen Natividad and García-Casillas, Perla Elvia and León, Arxel de and Herrera-May, Agustín Leobardo},
  title = {ZnO Nanoparticles by Hydrothermal Method: Synthesis and Characterization},
  journal = {Technologies},
  year = {2025},
  volume = {13},
  number = {1},
  pages = {18},
  doi = {10.3390/technologies13010018}
}
Kostenlos starten →