Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion
Materials · 19.01.2023 · 16 (3) · 944
DOI: 10.3390/ma16030944 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.01.2023. Verfasst von Akbar Heidarzadeh und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, Azarbaijan Shahid Madani University, Tabriz P.O. Box 53714-161, Iran. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
A new strategy is proposed to modify the grain structure and crystallographic texture of laser-powder bed fusion AlSi10Mg alloy using multi-pass friction stir processing (FSP). Accordingly, 1–3 passes of FSP with 100% overlap were performed. Scanning electron microscopy and electron backscattered diffraction were used for microstructural characterization. Continuous dynamic recrystallization and geometric dynamic recrystallization are the governing mechanisms of grain refinement during FSP. The stir zones have bimodal grain structures containing large and fine grains. The multi-pass FSP caused a considerable increase in the volume fraction of the large-grained area in the stir zone, which contained higher values of low-angle boundaries and sharp shear texture components of B(11¯2)[110] and B¯(1¯12¯)[1¯1¯0]. The formation of low-energy grain boundaries in the stir zone and alignment of the low-energy crystallographic planes with the surface of the sample made the strategy of using multi-pass FSP a promising candidate for corrosion resistance enhancement in future studies. Moreover, the detailed evolution of the grains, texture components, grain boundaries, and Si particles is discussed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Engineering, Azarbaijan Shahid Madani University, Tabriz P.O. Box 53714-161, Iran.
- Department of Applied Science, University of Quebec at Chicoutimi, Saguenay, QC G7H 2B1, Canada.
- Faculty of Materials Engineering, Sahand University of Technology, Tabriz P.O. Box 51335-1996, Iran.
- School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran P.O. Box 16846-13114, Iran.
ORCID-Profile: Akbar Heidarzadeh, Mousa Javidani, Hamidreza Jafarian, X-Grant Chen
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Heidarzadeh, A., Javidani, M., Mofarrehi, M., Motalleb-Nejad, P., Mohammadzadeh, R., Jafarian, H., & Chen, X. G. (2023). Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials, 16(3), 944. https://doi.org/10.3390/ma16030944
Vancouver
Heidarzadeh A, Javidani M, Mofarrehi M, Motalleb-Nejad P, Mohammadzadeh R, Jafarian H, et al. Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials. 2023;16(3):944. doi:10.3390/ma16030944
BibTeX
@article{Heidarzadeh2023,
author = {Heidarzadeh, Akbar and Javidani, Mousa and Mofarrehi, Mohammadreza and Motalleb-Nejad, Pouyan and Mohammadzadeh, Roghayeh and Jafarian, Hamidreza and Chen, X-Grant},
title = {Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {944},
doi = {10.3390/ma16030944}
}
EUVIMED