Effect of Electro-Thermo-Mechanical Coupling Stress on Top-Cooled E-Mode AlGaN/GaN HEMT
Materials · 10.02.2023 · 16 (4) · 1484
DOI: 10.3390/ma16041484 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.02.2023. Verfasst von Jie Jiang und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics and Communication Engineering, Chongqing University, Chongqing 400044, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key-Area Research and Development Program of Guangdong Province, Natural Science Foundation of Guangdong Province.
Abstract (Originalsprache)
This work investigated the effects of single stress and electro-thermo-mechanical coupling stress on the electrical properties of top-cooled enhancement mode (E-mode) Aluminium Gallium Nitride/Gallium Nitride (AlGaN/GaN) high electron mobility transistor (HEMT) (GS66508T). Planar pressure, linear deformation, punctate deformation, environmental temperature, electro-thermal coupling, thermo-mechanical coupling, and electro-thermo-mechanical coupling stresses were applied to the device. It was found that different kinds of stress had different influence mechanisms on the device. Namely, excessive mechanical pressure/deformation stress caused serious, irrecoverable degradation of the device’s leakage current, with the gate leakage current (Ig) increasing by ~107 times and the drain-to-source leakage current (Idss) increasing by ~106 times after mechanical punctate deformation of 0.5 mm. The device characteristics were not restored after the mechanical stress was removed. Compared with three mechanical stresses, environmental thermal stress had a greater influence on the device’s transfer characteristic and on-resistance (Ron) but far less influence on Ig and Idss. As was expected, multiple stress coupled to the device promoted invalidation of the device. For more in-depth investigation, finite element simulation carried out with COMSOL was used to analyze the effect of electro-thermo-mechanical coupling stress on top-cooled E-mode AlGaN/GaN HEMT. The results of the experiments and simulation demonstrated that single and coupled stresses, especially mechanical stress coupled with other stresses, degraded the electrical properties or even caused irreversible damage to top-cooled E-mode AlGaN/GaN HEMT. Mechanical stress should be reduced as much as possible in the packaging design, transportation, storage, and application of top-cooled E-mode AlGaN/GaN HEMT.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Microelectronics and Communication Engineering, Chongqing University, Chongqing 400044, China.
- The Science and Technology on Reliability Physics and Application of Electronic Component Laboratory, China Electronic Product Reliability and Environmental Testing Research Institute, Guangzhou 510610, China.
- Science and Technology on Analog Integrated Circuit Laboratory, Chongqing 401332, China.
ORCID-Profile: Jie Jiang, Yijun Shi, Yiqiang Chen
Förderung
- National Natural Science Foundation of China
- Key-Area Research and Development Program of Guangdong Province
- Natural Science Foundation of Guangdong Province
- the open Funds of the National Laboratory of Science and Technology on Analog Integrated Circuit
- National Key R&D Program of China
- Guangzhou Basic and Applied Basic Research Project
Zitieren
APA
Jiang, J., Chen, Q., Hu, S., Shi, Y., He, Z., Huang, Y., Hui, C., Chen, Y., Wu, H., & Lu, G. (2023). Effect of Electro-Thermo-Mechanical Coupling Stress on Top-Cooled E-Mode AlGaN/GaN HEMT. Materials, 16(4), 1484. https://doi.org/10.3390/ma16041484
Vancouver
Jiang J, Chen Q, Hu S, Shi Y, He Z, Huang Y, et al. Effect of Electro-Thermo-Mechanical Coupling Stress on Top-Cooled E-Mode AlGaN/GaN HEMT. Materials. 2023;16(4):1484. doi:10.3390/ma16041484
BibTeX
@article{Jiang2023,
author = {Jiang, Jie and Chen, Qiuqi and Hu, Shengdong and Shi, Yijun and He, Zhiyuan and Huang, Yun and Hui, Caixin and Chen, Yiqiang and Wu, Hao and Lu, Guoguang},
title = {Effect of Electro-Thermo-Mechanical Coupling Stress on Top-Cooled E-Mode AlGaN/GaN HEMT},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1484},
doi = {10.3390/ma16041484}
}
EUVIMED