EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

p-GaN Layer Etch Engineering for Defect Reduction in 200 mm Enhanced-Mode AlGaN/GaN HEMT Processing

Pauline Gaillard, Sébastien Avertin, Julien Drieu La Rochelle, Mohammed Zeghouane, Hyon-Ju Chauveau, Giovanni Giorgino, Aurore Constant, Ferdinando Iucolano

Electronics · 17.06.2026 · 15 (12) · 2690

DOI: 10.3390/electronics15122690 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 17.06.2026. Verfasst von Pauline Gaillard und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gate definition is a major challenge in p-GaN gate AlGaN/GaN HEMT structures because of the high selectivity and low plasma damage required during the etching process. In this work, self-terminated etching, developed to limit surface damage and loss of the underlying AlGaN layer, is investigated. A comparison of two over-etch chemistries (Cl2/O2/N2 and BCl3/SF6) revealed that the oxygen-based process yields superior results in terms of AlGaN surface morphology, producing a smoother surface and a more conformal p-GaN profile, while the fluorine-based process exhibited more anisotropic behavior, leading to p-GaN residues and surface pitting. To address across-wafer non-uniformity, a temperature gradient strategy using the tunable electrostatic chuck was developed. The optimized process was evaluated through automatic defect control and device robustness under drain bias-stress. A total reduction in defectivity and reliable HEMT devices across the wafer under high drain-source bias were achieved. These results demonstrate the effectiveness of the proposed solution, offering significant improvements in process efficiency and manufacturability.

Zitieren

APA

Gaillard, P., Avertin, S., Rochelle, J. D. L., Zeghouane, M., Chauveau, H., Giorgino, G., Constant, A., & Iucolano, F. (2026). p-GaN Layer Etch Engineering for Defect Reduction in 200 mm Enhanced-Mode AlGaN/GaN HEMT Processing. Electronics, 15(12), 2690. https://doi.org/10.3390/electronics15122690

Vancouver

Gaillard P, Avertin S, Rochelle JDL, Zeghouane M, Chauveau H, Giorgino G, et al. p-GaN Layer Etch Engineering for Defect Reduction in 200 mm Enhanced-Mode AlGaN/GaN HEMT Processing. Electronics. 2026;15(12):2690. doi:10.3390/electronics15122690

BibTeX
@article{Gaillard2026,
  author = {Gaillard, Pauline and Avertin, Sébastien and Rochelle, Julien Drieu La and Zeghouane, Mohammed and Chauveau, Hyon-Ju and Giorgino, Giovanni and Constant, Aurore and Iucolano, Ferdinando},
  title = {p-GaN Layer Etch Engineering for Defect Reduction in 200 mm Enhanced-Mode AlGaN/GaN HEMT Processing},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {12},
  pages = {2690},
  doi = {10.3390/electronics15122690}
}
Kostenlos starten →