EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Manufacturing and Characterization of Dental Crowns Made of 5-mol% Yttria Stabilized Zirconia by Digital Light Processing

Jae-Min Jung, Gyu-Nam Kim, Young-Hag Koh, Hyoun-Ee Kim

Materials · 09.02.2023 · 16 (4) · 1447

DOI: 10.3390/ma16041447 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.02.2023. Verfasst von Jae-Min Jung und 3 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Program in Precision Public Health, Korea University, Seoul 02841, Republic of Korea. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Ministry of Trade, industry & Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We herein report manufacturing of dental crowns made of 5-mol% yttria partially stabilized zirconia (5Y-PSZ) with desired mechanical properties, optical translucency and dimensional accuracy using digital light processing (DLP). To this end, all processing parameters were carefully controlled and optimized. First, 5Y-PSZ particles with a bimodal distribution were prepared via calcination of as-received granules and subsequent ball-milling and then used to formulate 5Y-PSZ suspensions with a high solid loading of 50 vol% required for high densification after sintering. Dispersant content was also optimized. To provide high dimensional accuracy, initial dimensions of dental crowns for 3D printing were precisely determined by considering increase and decrease in dimensions during photopolymerization and sintering, respectively. Photopolymerization time was also optimized for a given layer thickness of 50 μm to ensure good bonding between layers. A multi-step debinding schedule with a slow heating rate was employed to avoid formation of any defects. After sintering at 1500 °C for 2 h, 5Y-PSZ could be almost fully densified without noticeable defects within layers and at interfaces between layers. They had high relative densities (99.03 ± 0.39%) with a high cubic phase content (59.1%). These characteristics allowed for achievement of reasonably high mechanical properties (flexural strength = 625.4 ± 75.5 MPa and Weibull modulus = 7.9) and % transmittance (31.4 ± 0.7%). In addition, 5Y-PSZ dental crowns showed excellent dimensional accuracy (root mean square (RMS) for marginal discrepancy = 44.4 ± 10.8 μm and RMS for internal gap = 22.8 ± 1.6 μm) evaluated by the 3D scanning technique.

Schlagwörter

Stichwörter der Autor:innen

3D printingdental crownsdigital light processingstrengthzirconia

Autor:innen und Institutionen

  • Interdisciplinary Program in Precision Public Health, Korea University, Seoul 02841, Republic of Korea.
  • School of Biomedical Engineering, Korea University, Seoul 02841, Republic of Korea.
  • Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.

Förderung

  • Ministry of Trade, Industry and Energy
  • Ministry of Trade, industry & Energy

Zitieren

APA

Jung, J. M., Kim, G. N., Koh, Y. H., & Kim, H. E. (2023). Manufacturing and Characterization of Dental Crowns Made of 5-mol% Yttria Stabilized Zirconia by Digital Light Processing. Materials, 16(4), 1447. https://doi.org/10.3390/ma16041447

Vancouver

Jung JM, Kim GN, Koh YH, Kim HE. Manufacturing and Characterization of Dental Crowns Made of 5-mol% Yttria Stabilized Zirconia by Digital Light Processing. Materials. 2023;16(4):1447. doi:10.3390/ma16041447

BibTeX
@article{Jung2023,
  author = {Jung, Jae-Min and Kim, Gyu-Nam and Koh, Young-Hag and Kim, Hyoun-Ee},
  title = {Manufacturing and Characterization of Dental Crowns Made of 5-mol% Yttria Stabilized Zirconia by Digital Light Processing},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1447},
  doi = {10.3390/ma16041447}
}
Kostenlos starten →