Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review
Materials · 06.02.2023 · 16 (4) · 1375
DOI: 10.3390/ma16041375 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 06.02.2023. Verfasst von Paula Rodríguez-González und 2 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ciencia e Ingeniería de Materiales e Ingeniería Química, IAAB, Universidad Carlos lll de Madrid, Avda. De la Universidad 30, 38911 Le…. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 114 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Government of Madrid (Dra. Gral. Universidades e Investigación.
Abstract (Originalsprache)
Out of all the metal additive manufacturing (AM) techniques, the directed energy deposition (DED) technique, and particularly the wire-based one, are of great interest due to their rapid production. In addition, they are recognized as being the fastest technique capable of producing fully functional structural parts, near-net-shape products with complex geometry and almost unlimited size. There are several wire-based systems, such as plasma arc welding and laser melting deposition, depending on the heat source. The main drawback is the lack of commercially available wire; for instance, the absence of high-strength aluminum alloy wires. Therefore, this review covers conventional and innovative processes of wire production and includes a summary of the Al-Cu-Li alloys with the most industrial interest in order to foment and promote the selection of the most suitable wire compositions. The role of each alloying element is key for specific wire design in WAAM; this review describes the role of each element (typically strengthening by age hardening, solid solution and grain size reduction) with special attention to lithium. At the same time, the defects in the WAAM part limit its applicability. For this reason, all the defects related to the WAAM process, together with those related to the chemical composition of the alloy, are mentioned. Finally, future developments are summarized, encompassing the most suitable techniques for Al-Cu-Li alloys, such as PMC (pulse multicontrol) and CMT (cold metal transfer).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Ciencia e Ingeniería de Materiales e Ingeniería Química, IAAB, Universidad Carlos lll de Madrid, Avda. De la Universidad 30, 38911 Leganés, Spain.
ORCID-Profile: Paula Rodríguez-González, Elisa María Ruiz-Navas, Elena Gordo
Förderung
- Regional Government of Madrid (Dra. Gral. Universidades e Investigación
Zitieren
APA
Rodríguez-González, P., Ruiz-Navas, E. M., & Gordo, E. (2023). Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review. Materials, 16(4), 1375. https://doi.org/10.3390/ma16041375
Vancouver
Rodríguez-González P, Ruiz-Navas EM, Gordo E. Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review. Materials. 2023;16(4):1375. doi:10.3390/ma16041375
BibTeX
@article{RodrguezGonzlez2023,
author = {Rodríguez-González, Paula and Ruiz-Navas, Elisa María and Gordo, Elena},
title = {Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1375},
doi = {10.3390/ma16041375}
}
EUVIMED