Hardness Distribution of Al2050 Parts Fabricated Using Additive Friction Stir Deposition
Materials · 02.02.2023 · 16 (3) · 1278
DOI: 10.3390/ma16031278 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.02.2023. Verfasst von Hamed Ghadimi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, USA. Die Arbeit wurde bisher 60-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Center for Innovations in Structural Integrity Assurance (CISIA), a National Science Foundation (NSF) Industry/University Cooperative Research Center, Center for Innovations in Structural Integrity Assurance (CISIA).
Abstract (Originalsprache)
The solid-state additive friction stir deposition (AFSD) process is a layer-by-layer metal 3D-printing technology. In this study, AFSD is used to fabricate Al–Cu–Li 2050 alloy parts. The hardness values for various regions of the as-deposited built parts are measured, and the results are contrasted with those of the feedstock material. The as-fabricated Al2050 parts are found to have a unique hardness distribution due to the location-specific variations in the processing temperature profile. The XRD results indicate the presence of the secondary phases in the deposited parts, and EDS mapping confirms the formation of detectable alloying particles in the as-deposited Al2050 matrix. The AFSD thermal–mechanical process causes the unique hardness distribution and the reduced microhardness level in the AFSD components, in contrast to those of the feedstock material.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, USA.
- MELD Manufacturing Corporation, 200 Technology Dr, Christiansburg, VA 24073, USA.
- Lockheed Martin Space-Michoud, New Orleans, LA 70129, USA.
ORCID-Profile: Hamed Ghadimi, Shengmin Guo
Förderung
- National Science Foundation
- Center for Innovations in Structural Integrity Assurance (CISIA), a National Science Foundation (NSF) Industry/University Cooperative Research Center
- Center for Innovations in Structural Integrity Assurance (CISIA)
Zitieren
APA
Ghadimi, H., Ding, H., Emanet, S., Talachian, M., Cox, C., Eller, M., & Guo, S. (2023). Hardness Distribution of Al2050 Parts Fabricated Using Additive Friction Stir Deposition. Materials, 16(3), 1278. https://doi.org/10.3390/ma16031278
Vancouver
Ghadimi H, Ding H, Emanet S, Talachian M, Cox C, Eller M, et al. Hardness Distribution of Al2050 Parts Fabricated Using Additive Friction Stir Deposition. Materials. 2023;16(3):1278. doi:10.3390/ma16031278
BibTeX
@article{Ghadimi2023,
author = {Ghadimi, Hamed and Ding, Huan and Emanet, Selami and Talachian, Mojtaba and Cox, Chase and Eller, Michael and Guo, Shengmin},
title = {Hardness Distribution of Al2050 Parts Fabricated Using Additive Friction Stir Deposition},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {1278},
doi = {10.3390/ma16031278}
}
EUVIMED