Dielectric Spectroscopy of Calcium Titanate Processed by Spark Plasma Sintering
Materials · 20.01.2023 · 16 (3) · 975
DOI: 10.3390/ma16030975 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.01.2023. Verfasst von Pavel Ctibor und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Plasma Physics of the Czech Academy of Sciences, Za Slovankou 1782/3, 182 00 Prague, Czech Republic. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Calcium titanate (CaTiO3) powder was compacted by spark plasma sintering (SPS). The resulting products were subjected to the phase stability study and dielectric characterization. The change in temperature of SPS between 1100 °C and 1250 °C had a clear and straightforward effect on density, porosity, relative permittivity, loss tangent, and DC resistivity. Since the SPS itself introduces certain oxygen deficiency into Ti-perovskites, all samples were annealed after SPS. However, this post-processing did not mask the effects of the SPS regime. Optical reflectance measurements were completed to compare and quantify the sample coloration and support the dielectric results with corresponding optical band gap estimations. Subtle changes in the CaTiO3 crystal lattice arrangement, completed between 1150 °C and 1250 °C and documented in the literature for conventionally sintered samples, could not be confirmed for SPS-prepared calcium titanate. The novelty of this research work is in producing very stable dielectric ceramics and an indication of the SPS processing parameters suitable for this. The best sample showed at 1 MHz frequency the combination of relative permittivity 370, loss tangent 0.008, and DC resistivity 3 × 1012 Ωm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Plasma Physics of the Czech Academy of Sciences, Za Slovankou 1782/3, 182 00 Prague, Czech Republic.
- Faculty of Electrical Engineering, Czech Technical University, Technicka 2, 166 27 Prague, Czech Republic.
ORCID-Profile: Pavel Ctibor, František Lukáč
Zitieren
APA
Ctibor, P., Sedláček, J., Straka, L., Lukáč, F., & Neufuss, K. (2023). Dielectric Spectroscopy of Calcium Titanate Processed by Spark Plasma Sintering. Materials, 16(3), 975. https://doi.org/10.3390/ma16030975
Vancouver
Ctibor P, Sedláček J, Straka L, Lukáč F, Neufuss K. Dielectric Spectroscopy of Calcium Titanate Processed by Spark Plasma Sintering. Materials. 2023;16(3):975. doi:10.3390/ma16030975
BibTeX
@article{Ctibor2023,
author = {Ctibor, Pavel and Sedláček, Josef and Straka, Libor and Lukáč, František and Neufuss, Karel},
title = {Dielectric Spectroscopy of Calcium Titanate Processed by Spark Plasma Sintering},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {975},
doi = {10.3390/ma16030975}
}
EUVIMED