EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Stability and Densification Behavior of Cantor-Type High-Entropy Alloy Processed by Spark Plasma Sintering

Marcin Madej iD, Beata Leszczyńska-Madej iD, Anna Kopeć-Surzyn, Paweł Nieroda iD, Stanislav Rusz iD

Materials · 07.10.2025 · 18 (19) · 4625

DOI: 10.3390/ma18194625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.10.2025. Verfasst von Marcin Madej und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, 30 Mickiewicza Ave, 30-059 Krakow, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: "Excellence initiative - research university" for the AGH University of Krakow", “Excellence initiative—research university” for the AGH University of Krakow.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-entropy alloys (HEAs) of the Cantor type (CoCrFeMnNi) are widely recognized as model systems for studying the relationships between composition, microstructure, and functional performance. In this study, atomized Cantor alloy powders were consolidated using spark plasma sintering (SPS) under systematically varied process parameters (temperature and dwell time). The densification behavior, microstructural evolution, and mechanical response were investigated using Archimedes’ density measurements, Vickers hardness testing, compression tests, scanning electron microscopy, and EDS mapping. The results reveal a non-linear relationship between sintering temperature and densification, with maximum relative densities obtained at 1050 °C and 1100 °C for short dwell times. Despite the ultrafast nature of SPS, grain growth was observed, particularly at elevated temperatures and extended dwell times, challenging the assumption that SPS inherently limits grain coarsening. All sintered samples retained a single-phase FCC structure with homogeneous elemental distribution, and no phase segregation or secondary precipitates were detected. Compression testing showed that samples sintered at 1050 °C and 1070 °C exhibited the highest strength, demonstrating the strong interplay between sintering kinetics and grain cohesion.

Schlagwörter

Stichwörter der Autor:innen

Cantor alloy (CoCrFeMnNi)densification behaviorhigh entropy alloysmicrostructural evolutionpowdersspark plasma sintering (SPS)

Autor:innen und Institutionen

  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, 30 Mickiewicza Ave, 30-059 Krakow, Poland.
  • Faculty of Non-Ferrous Metals, AGH University of Krakow, 30 Mickiewicza Ave, 30-059 Krakow, Poland.
  • Faculty of Materials Science and Ceramics, AGH University of Krakow, al. Mickiewicza 30, 30-059 Krakow, Poland.
  • Department of Manufacturing Technology, Faculty of Mechanical Engineering, VSB-Czech Technical University in Prague, Technická 4, 166 07 Praha 6, Czech Republic.

ORCID-Profile: Marcin Madej, Beata Leszczyńska-Madej, Paweł Nieroda, Stanislav Rusz

Förderung

  • "Excellence initiative - research university" for the AGH University of Krakow"
  • “Excellence initiative—research university” for the AGH University of Krakow

Zitieren

APA

Madej, M., Leszczyńska-Madej, B., Kopeć-Surzyn, A., Nieroda, P., & Rusz, S. (2025). Microstructural Stability and Densification Behavior of Cantor-Type High-Entropy Alloy Processed by Spark Plasma Sintering. Materials, 18(19), 4625. https://doi.org/10.3390/ma18194625

Vancouver

Madej M, Leszczyńska-Madej B, Kopeć-Surzyn A, Nieroda P, Rusz S. Microstructural Stability and Densification Behavior of Cantor-Type High-Entropy Alloy Processed by Spark Plasma Sintering. Materials. 2025;18(19):4625. doi:10.3390/ma18194625

BibTeX
@article{Madej2025,
  author = {Madej, Marcin and Leszczyńska-Madej, Beata and Kopeć-Surzyn, Anna and Nieroda, Paweł and Rusz, Stanislav},
  title = {Microstructural Stability and Densification Behavior of Cantor-Type High-Entropy Alloy Processed by Spark Plasma Sintering},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {4625},
  doi = {10.3390/ma18194625}
}
Kostenlos starten →