EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Adding Value to Secondary Aluminum Casting Alloys: A Review on Trends and Achievements

Helder Nunes iD, Omid Emadinia iD, Rui Soares, Manuel F Vieira iD, Ana Reis iD

Materials · 17.01.2023 · 16 (3) · 895

DOI: 10.3390/ma16030895 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 17.01.2023. Verfasst von Helder Nunes und 4 weiteren Autor:innen. Beteiligte Einrichtung: LAETA/INEGI, Institute of Science and Innovation in Mechanical and Industrial Engineering, 4200-465 Porto, Portugal. Die Arbeit wurde bisher 67-mal zitiert (Crossref) und nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Plano de Recuperação e Resiliência (PRR), Portuguese Foundation for Science and Technology (FCT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum is a critical element of the circular economy as it can be recycled several times. Moreover, Al recycling is a more economically and environmentally efficient procedure than the primary Al production from ores. Secondary aluminum alloys are mostly used in casting applications since it is possible to accommodate their chemical composition through secondary manufacturing processes. However, the quality of the alloys may be considerably altered during the different steps of the recycling process. Inadequate waste sorting might result in excessive contamination. Iron is the most dangerous contaminant because it causes brittle and fragile intermetallic phases, which significantly impacts the mechanical characteristics of alloys. In addition, the microstructure of the alloy changes significantly after multiple cycles of remelting. These issues lead to the downcycling of aluminum, i.e., in other words, the reduction in the overall quality of the alloys. Thus, it has been shown that a number of procedures, including ultrasonic melt treatment and microalloying with rare earths, can somewhat alter the shape of the Fe-rich phases in order to reduce the shortcomings of downcycling. However, a solid mechanical characterization is still missing in order to improve the Fe-rich phase alteration.

Schlagwörter

Stichwörter der Autor:innen

intermetallic compoundsmicrostructurerecyclingsecondary aluminum alloys

Autor:innen und Institutionen

  • LAETA/INEGI, Institute of Science and Innovation in Mechanical and Industrial Engineering, 4200-465 Porto, Portugal.
  • Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal.

ORCID-Profile: Helder Nunes, Omid Emadinia, Manuel F Vieira, Ana Reis

Förderung

  • Fundação para a Ciência e Tecnologia
  • Plano de Recuperação e Resiliência (PRR)
  • Portuguese Foundation for Science and Technology (FCT)
  • Project Hi-rEV—Recuperação do Setor de Componentes Automóveis
  • AM2R—Agenda Mobilizadora para a inovação empresarial do setor das Duas Rodas
  • Plano de Recuperação e Resiliência (PRR), República Portuguesa through NextGeneration EU

Zitieren

APA

Nunes, H., Emadinia, O., Soares, R., Vieira, M. F., & Reis, A. (2023). Adding Value to Secondary Aluminum Casting Alloys: A Review on Trends and Achievements. Materials, 16(3), 895. https://doi.org/10.3390/ma16030895

Vancouver

Nunes H, Emadinia O, Soares R, Vieira MF, Reis A. Adding Value to Secondary Aluminum Casting Alloys: A Review on Trends and Achievements. Materials. 2023;16(3):895. doi:10.3390/ma16030895

BibTeX
@article{Nunes2023,
  author = {Nunes, Helder and Emadinia, Omid and Soares, Rui and Vieira, Manuel F and Reis, Ana},
  title = {Adding Value to Secondary Aluminum Casting Alloys: A Review on Trends and Achievements},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {895},
  doi = {10.3390/ma16030895}
}
Kostenlos starten →