EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Review on Porosity Formation in Aluminum-Based Alloys

Agnes M Samuel, Ehab Samuel, Victor Songmene iD, Fawzy H Samuel

Materials · 01.03.2023 · 16 (5) · 2047

DOI: 10.3390/ma16052047 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 01.03.2023. Verfasst von Agnes M Samuel und 3 weiteren Autor:innen. Beteiligte Einrichtung: Département des Sciences Appliquées, Université du Québec à Chicoutimi, Saguenay, QC G7H 2B1, Canada. Die Arbeit wurde bisher 81-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main objective of this review is to analyze the equations proposed for expressing the effect of various parameters on porosity formation in aluminum-based alloys. These parameters include alloying elements, solidification rate, grain refining, modification, hydrogen content, as well as the applied pressure on porosity formation in such alloys. They are used to establish as precisely as possible a statistical model to describe the resulting porosity characteristics such as the percentage porosity and pore characteristics, as controlled by the chemical composition of the alloy, modification, grain refining, and the casting conditions. The measured parameters of percentage porosity, maximum pore area, average pore area, maximum pore length, and average pore length, which were obtained from statistical analysis, are discussed, and they are supported using optical micrographs, electron microscopic images of fractured tensile bars, as well as radiography. In addition, an analysis of the statistical data is presented. It should be noted that all alloys described were well degassed and filtered prior to casting.

Schlagwörter

Stichwörter der Autor:innen

grain refininghydrogenmodificationporositysolidification ratestatistical modeling

Autor:innen und Institutionen

  • Département des Sciences Appliquées, Université du Québec à Chicoutimi, Saguenay, QC G7H 2B1, Canada.
  • Department of Mechanical Engineering, École de Technologie Supérieure (ÉTS), Montréal, QC H3C 1K3, Canada.

ORCID-Profile: Victor Songmene

Zitieren

APA

Samuel, A. M., Samuel, E., Songmene, V., & Samuel, F. H. (2023). A Review on Porosity Formation in Aluminum-Based Alloys. Materials, 16(5), 2047. https://doi.org/10.3390/ma16052047

Vancouver

Samuel AM, Samuel E, Songmene V, Samuel FH. A Review on Porosity Formation in Aluminum-Based Alloys. Materials. 2023;16(5):2047. doi:10.3390/ma16052047

BibTeX
@article{Samuel2023,
  author = {Samuel, Agnes M and Samuel, Ehab and Songmene, Victor and Samuel, Fawzy H},
  title = {A Review on Porosity Formation in Aluminum-Based Alloys},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {2047},
  doi = {10.3390/ma16052047}
}
Kostenlos starten →