EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Digital Light Processing of Zirconia Suspensions Containing Photocurable Monomer/Camphor Vehicle for Dental Applications

Seo-Young Yang, Young-Hag Koh, Hyoun-Ee Kim

Materials · 01.01.2023 · 16 (1) · 402

DOI: 10.3390/ma16010402 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.01.2023. Verfasst von Seo-Young Yang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Program in Precision Public Health, Korea University, Seoul 02841, Republic of Korea. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Ministry of Trade, industry & Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the utility of solid camphor as a novel diluent in photocurable hexanediol diacrylate (HDDA) monomer to manufacture 4 mol% yttria partially stabilized zirconia (4Y-PSZ) components for dental applications by digital light processing (DLP). The use of a 65 wt% HDDA–35 wt% camphor solution allowed 4Y-PSZ suspensions to have reasonably low viscosities (1399 ± 55.8 mPa·s at a shear rate of 75 s−1), measured by a cone/plate viscometer, at a high solid loading of 48 vol%, where 4Y-PSZ particles prepared by calcination of as-received 4Y-PSZ granules, followed by a ball-milling process, were used with assistance of a dispersant. These 4Y-PSZ suspensions could be successfully applied to our custom-made DLP machine for manufacturing 4Y-PSZ components. To this end, several processing parameters, including layer thickness of 4Y-PSZ suspension, UV illumination time for layer-by-layer photocuring process, and initial dimensions of 4Y-PSZ objects, were tightly controlled. As sintering temperature increased from 1300 °C to 1500 °C, relative density and grain size of 4Y-PSZ objects increased, and cubic phase content also increased. Thus, after sintering at the highest temperature of 1500 °C for 3 h, high mechanical properties (biaxial flexural strength = 911 ± 40.7 MPa, hardness = 1371 ± 14.4 Hv) and reasonably high optical transmittance (translucency parameter = 7.77 ± 0.32, contrast ratio = 0.809 ± 0.007), evaluated by a spectrophotometer, were obtained due to a high relative density (97.2 ± 1.38%), which would be useful for dental applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingdental crownsdigital light processingphotopolymerizationzirconia

Autor:innen und Institutionen

  • Interdisciplinary Program in Precision Public Health, Korea University, Seoul 02841, Republic of Korea.
  • School of Biomedical Engineering, Korea University, Seoul 02841, Republic of Korea.
  • Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.

Förderung

  • Ministry of Trade, Industry and Energy
  • Ministry of Trade, industry & Energy

Zitieren

APA

Yang, S. Y., Koh, Y. H., & Kim, H. E. (2023). Digital Light Processing of Zirconia Suspensions Containing Photocurable Monomer/Camphor Vehicle for Dental Applications. Materials, 16(1), 402. https://doi.org/10.3390/ma16010402

Vancouver

Yang SY, Koh YH, Kim HE. Digital Light Processing of Zirconia Suspensions Containing Photocurable Monomer/Camphor Vehicle for Dental Applications. Materials. 2023;16(1):402. doi:10.3390/ma16010402

BibTeX
@article{Yang2023,
  author = {Yang, Seo-Young and Koh, Young-Hag and Kim, Hyoun-Ee},
  title = {Digital Light Processing of Zirconia Suspensions Containing Photocurable Monomer/Camphor Vehicle for Dental Applications},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {402},
  doi = {10.3390/ma16010402}
}
Kostenlos starten →