Evaluation of the Effect of Die Surface Condition on Non-Steady-State Deformation and Force Behavior in Pure Copper Micro-Extrusion Using Geometrically Necessary Dislocation Density
Lubricants · 18.11.2026 · 14 (11) · 438
DOI: 10.3390/lubricants14110438 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 18.11.2026. Verfasst von Keisuke Sugiyama und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In recent years, copper-based conductive and thermal management components have required fine structures for miniaturization and enhanced functionality. Micro-forming is an excellent processing method characterized by high productivity and suitability for mass production. Since micro-forming is highly influenced by tribological conditions, proper setting of die surface conditions is essential. In micro-extrusion, surface coatings such as diamond-like carbon (DLC) have been explored to optimize tribological conditions. However, the effects of die surface properties on the internal deformation state (evolution of the work-hardened microstructure and the resulting plastic-flow) during forming have not been quantitatively characterized. In this study, micro-extrusion tests of pure copper were conducted using two types of dies: one with a DLC coating and one without any coating. Changes in the internal deformation with stroke progression were analyzed using kernel average misorientation (KAM) maps and geometrically necessary dislocation (GND) density. Measurement of GND density enabled quantitative evaluation of the internal deformation state within the material. Consequently, changes in GND density with stroke progression closely corresponded to the force behavior, suggesting that die surface conditions significantly affect not only the frictional state at the material surface but also the internal deformation.
Zitieren
APA
Sugiyama, K., Ito, M., Funazuka, T., & Shiratori, T. (2026). Evaluation of the Effect of Die Surface Condition on Non-Steady-State Deformation and Force Behavior in Pure Copper Micro-Extrusion Using Geometrically Necessary Dislocation Density. Lubricants, 14(11), 438. https://doi.org/10.3390/lubricants14110438
Vancouver
Sugiyama K, Ito M, Funazuka T, Shiratori T. Evaluation of the Effect of Die Surface Condition on Non-Steady-State Deformation and Force Behavior in Pure Copper Micro-Extrusion Using Geometrically Necessary Dislocation Density. Lubricants. 2026;14(11):438. doi:10.3390/lubricants14110438
BibTeX
@article{Sugiyama2026,
author = {Sugiyama, Keisuke and Ito, Masato and Funazuka, Tatsuya and Shiratori, Tomomi},
title = {Evaluation of the Effect of Die Surface Condition on Non-Steady-State Deformation and Force Behavior in Pure Copper Micro-Extrusion Using Geometrically Necessary Dislocation Density},
journal = {Lubricants},
year = {2026},
volume = {14},
number = {11},
pages = {438},
doi = {10.3390/lubricants14110438}
}
EUVIMED