EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Local Friction Conditions in Hot Forging and Application to the Flash Section of Die in Crankshaft Forging

Kimika Nakamura, Atsuo Watanabe, Fumihiro Itoigawa, Kazuhiko Kitamura

Lubricants · 18.03.2026 · 14 (3) · 133

DOI: 10.3390/lubricants14030133 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 18.03.2026. Verfasst von Kimika Nakamura und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To accurately predict the shape of an automobile product, such as a crankshaft, produced by hot die forging, a preliminary simulation of the forging process indicated the significant impacts of local and varying friction coefficients between the complex-shaped die and the material. This study identified the friction coefficients through ring compression and tapered plug penetration tests, focusing on regions with high pressure or large contact areas. The results revealed variations in the friction coefficients across different regions. Consequently, the study suggests implementing locally appropriate friction coefficients on specific die surfaces exhibiting conditions akin to those observed in the friction tests. Specifically, a Coulomb’s friction coefficient of 0.14 was assigned to the product shape region of the crankshaft die. Additionally, a friction model transitioning from a Coulomb’s friction coefficient of 0.5 to a shear friction coefficient of 0.6 was applied in the flash region with significant sliding distances. By incorporating these tailored friction conditions into the simulation of hot die forging for crankshaft manufacturing, the study achieves more accurate material flow, die filling, and underfill replication.

Zitieren

APA

Nakamura, K., Watanabe, A., Itoigawa, F., & Kitamura, K. (2026). Determination of Local Friction Conditions in Hot Forging and Application to the Flash Section of Die in Crankshaft Forging. Lubricants, 14(3), 133. https://doi.org/10.3390/lubricants14030133

Vancouver

Nakamura K, Watanabe A, Itoigawa F, Kitamura K. Determination of Local Friction Conditions in Hot Forging and Application to the Flash Section of Die in Crankshaft Forging. Lubricants. 2026;14(3):133. doi:10.3390/lubricants14030133

BibTeX
@article{Nakamura2026,
  author = {Nakamura, Kimika and Watanabe, Atsuo and Itoigawa, Fumihiro and Kitamura, Kazuhiko},
  title = {Determination of Local Friction Conditions in Hot Forging and Application to the Flash Section of Die in Crankshaft Forging},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {3},
  pages = {133},
  doi = {10.3390/lubricants14030133}
}
Kostenlos starten →