EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Durability of Forging Tools Used in the Hot Closed Die Forging Process—A Review

Grzegorz Ficak iD, Aneta Łukaszek-Sołek iD, Marek Hawryluk iD

Materials · 05.11.2024 · 17 (22) · 5407

DOI: 10.3390/ma17225407 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 05.11.2024. Verfasst von Grzegorz Ficak und 2 weiteren Autor:innen. Beteiligte Einrichtung: GK FORGE, Przemysłowa 10 Street, 43-440 Goleszów, Poland. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 108 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of Poland, Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents the classification of the wear mechanisms of forging tools. The durability of dies can be enhanced through a variety of methods, including the selection of appropriate hot working tool steel, the application of effective heat treatment, the utilization of advanced surface engineering techniques, and the incorporation of lubricating and cooling agents. Two popular methods of tool regeneration, such as re-profiling and laser regeneration, are presented. The issue of numerical wear prediction based on the Archard model, the correlation of this model with experimental results, low-cycle fatigue (HTLCF), and an alternative method based on artificial neural networks are discussed. The paper aims to present currently known wear mechanisms and the methods of increasing and predicting tool durability.

Schlagwörter

Stichwörter der Autor:innen

artificial neural networksdestructive mechanismshot die forginglubricationnumerical calculationstool steeltribologywear

Autor:innen und Institutionen

  • GK FORGE, Przemysłowa 10 Street, 43-440 Goleszów, Poland.
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Av. Mickiewicza 30, 30-059 Krakow, Poland.
  • Department of Metal Forming, Welding and Metrology, Wroclaw University of Science and Technology, Lukasiewicza Street 5, 50-370 Wroclaw, Poland.

ORCID-Profile: Grzegorz Ficak, Aneta Łukaszek-Sołek, Marek Hawryluk

Förderung

  • Ministry of Science and Higher Education of Poland
  • Ministry of Science and Higher Education

Zitieren

APA

Ficak, G., Łukaszek-Sołek, A., & Hawryluk, M. (2024). Durability of Forging Tools Used in the Hot Closed Die Forging Process—A Review. Materials, 17(22), 5407. https://doi.org/10.3390/ma17225407

Vancouver

Ficak G, Łukaszek-Sołek A, Hawryluk M. Durability of Forging Tools Used in the Hot Closed Die Forging Process—A Review. Materials. 2024;17(22):5407. doi:10.3390/ma17225407

BibTeX
@article{Ficak2024,
  author = {Ficak, Grzegorz and Łukaszek-Sołek, Aneta and Hawryluk, Marek},
  title = {Durability of Forging Tools Used in the Hot Closed Die Forging Process—A Review},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {22},
  pages = {5407},
  doi = {10.3390/ma17225407}
}
Kostenlos starten →