Performance Evaluation of a Halbach Permanent Magnet Axial Protection Bearing Under Vertical Magnetic Levitation Flywheel Rotor Drop
Lubricants · 15.01.2026 · 14 (1) · 40
DOI: 10.3390/lubricants14010040 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 15.01.2026. Verfasst von Dengke Li und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Provincial Science and Technology Research and Development Joint Fund, National Natural Science Foundation of China, Opening Project of the Key Laboratory of CNC Equipment Reliability, Ministry of Education, Jilin University.
Abstract (Originalsprache)
This study addresses the issues with traditional rolling protection bearings in vertical magnetic levitation flywheel energy storage systems (FESSs), which are prone to impact, wear, and temperature rise under abnormal conditions, such as drops. It designed a permanent magnet axial protection bearing based on a Halbach array, utilizing N42SH permanent magnet material. The five-layer Halbach array achieved a maximum axial magnetic force of 86 KN and a maximum air gap magnetic flux density of 2.2 T, meeting the application requirements. Simulation results, combined with rotor drop dynamics and thermal analysis, show that under an 8000 rpm drop condition, the permanent magnet bearing reduces radial and axial contact forces by approximately 60% and 54%, respectively, and wear by around 70%. Additionally, the maximum system temperature decreases from 109 °C to 74 °C, with a 32% reduction in temperature rise. Friction experimental analysis indicates that low frequency, low load, and moderate temperatures improve friction stability and reduce wear. Overall, the permanent magnet axial protective bearing effectively mitigates drop impact, reduces friction heat and wear, and enhances the safety and reliability of the flywheel energy storage system under abnormal working conditions, providing valuable theoretical support and a design reference for engineering applications.
Förderung
- Henan Provincial Science and Technology Research and Development Joint Fund
- National Natural Science Foundation of China
- Opening Project of the Key Laboratory of CNC Equipment Reliability, Ministry of Education, Jilin University
- Postdoctoral Fellowship Program of China Postdoctoral Science Foundation
- National Key R&D Program of Manufacturing Basic Technology and Key Components
Zitieren
APA
Li, D., Ye, J., Chen, G., Hu, L., Wang, Z., Qian, T., Zhang, J., Zi, M., & Liang, C. (2026). Performance Evaluation of a Halbach Permanent Magnet Axial Protection Bearing Under Vertical Magnetic Levitation Flywheel Rotor Drop. Lubricants, 14(1), 40. https://doi.org/10.3390/lubricants14010040
Vancouver
Li D, Ye J, Chen G, Hu L, Wang Z, Qian T, et al. Performance Evaluation of a Halbach Permanent Magnet Axial Protection Bearing Under Vertical Magnetic Levitation Flywheel Rotor Drop. Lubricants. 2026;14(1):40. doi:10.3390/lubricants14010040
BibTeX
@article{Li2026,
author = {Li, Dengke and Ye, Jun and Chen, Gang and Hu, Lai and Wang, Zixi and Qian, Taishun and Zhang, Jiahao and Zi, Mengchen and Liang, Chao},
title = {Performance Evaluation of a Halbach Permanent Magnet Axial Protection Bearing Under Vertical Magnetic Levitation Flywheel Rotor Drop},
journal = {Lubricants},
year = {2026},
volume = {14},
number = {1},
pages = {40},
doi = {10.3390/lubricants14010040}
}
EUVIMED