EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Axial-Bearing Position of Active Magnetic Suspension Flywheel Energy Storage System on Vibration Characteristics of Flywheel Rotor

Lei Wang, Tielei Li, Zhengyi Ren

Actuators · 13.06.2025 · 14 (6) · 290

DOI: 10.3390/act14060290 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 13.06.2025. Verfasst von Lei Wang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National High-tech Research and Development Program of China, Fundamental Research Special Funds for the Central Universities of Harbin Engineering University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces a flywheel rotor support structure for an active magnetic suspension flywheel energy storage system. In this structure, there is an axial offset between the axial-bearing position and the mass-center of the flywheel rotor, which affects the tilting rotation of the flywheel rotor and which causes the coupling between its tilting rotation and radial motion. Therefore, the influence of the bearing position on the vibration characteristics of the flywheel rotor is explored in this paper. The tilting rotation constraint of the flywheel rotor by axial active magnetic bearing (AAMB) is analyzed, and the radial active magnetic bearing (RAMB) is equivalently treated with dynamic stiffness and dynamic damping. Based on this, a dynamic model of the active magnetic suspension rigid flywheel rotor, considering the position parameter of the axial bearing, is established. To quantify the axial offset between the position of the AAMB and the mass-center of the flywheel rotor, the axial-bearing position offset ratio γ is defined. The variation trend of the vibration characteristics of flywheel rotor with γ is discussed, and its correctness is validated through experiments. It is indicated that, with the increase of γ, the second-order positive precession frequency of the flywheel rotor decreases obviously, and the influence of the gyroscope torque gradually weakens. Meanwhile, its second-order critical speed ω2c decreases significantly (when γ is 0.5, ω2c decreases by about 62%); ω2c corresponds to the inclined mode, revealing that the offset ratio γ has a prominent influence on the critical speed under this mode. In addition, as γ increases, the mass unbalance response amplitude of the flywheel rotor under the speed of ω2c decreases significantly. The reasonable design of the axial-bearing position parameter can effectively improve the operational stability of the active magnetic suspension flywheel energy storage system.

Förderung

  • National High-tech Research and Development Program of China
  • Fundamental Research Special Funds for the Central Universities of Harbin Engineering University

Zitieren

APA

Wang, L., Li, T., & Ren, Z. (2025). The Influence of Axial-Bearing Position of Active Magnetic Suspension Flywheel Energy Storage System on Vibration Characteristics of Flywheel Rotor. Actuators, 14(6), 290. https://doi.org/10.3390/act14060290

Vancouver

Wang L, Li T, Ren Z. The Influence of Axial-Bearing Position of Active Magnetic Suspension Flywheel Energy Storage System on Vibration Characteristics of Flywheel Rotor. Actuators. 2025;14(6):290. doi:10.3390/act14060290

BibTeX
@article{Wang2025,
  author = {Wang, Lei and Li, Tielei and Ren, Zhengyi},
  title = {The Influence of Axial-Bearing Position of Active Magnetic Suspension Flywheel Energy Storage System on Vibration Characteristics of Flywheel Rotor},
  journal = {Actuators},
  year = {2025},
  volume = {14},
  number = {6},
  pages = {290},
  doi = {10.3390/act14060290}
}
Kostenlos starten →