Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall
Lubricants · 06.09.2023 · 11 (9) · 378
DOI: 10.3390/lubricants11090378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 06.09.2023. Verfasst von Minfeng Yu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Zhejiang Provincial Natural Science Foundation of China, the General Projects of the National Natural Science Foundation of China, the Key Program of the National Natural Science Foundation of China.
Abstract (Originalsprache)
By setting textures on the side walls of a rotor, based on SST k-ω turbulence and the mixture model, the effects of depth-to-diameter ratio, shape, and rotational speed on interface temperature are analyzed. Local Nu number, flow field in textures, and gas distribution are used to verify the conclusion. When rotational speed increases, there are three different stages on the surface: liquid-dominated, mixed two-phase, and gas-dominated. This leads to a big difference in heat transfer on the side wall and causes the temperature on the seal face to increase when cavitation is considered. The distribution of the gas phase is explained through drag reduction, which has a high correlation with the velocity gradient near the surface. For several common shapes, heat transfer enhancement of textures is compared under high speed. The key influencing factor is the depth-to-diameter ratio, which causes flow stratification and reduces heat transfer. Flow stratification leads to different results of maximum temperature on the seal face when cavitation is considered. Results show that at high speed, a deep, circular texture is better when cavitation does not occur, and a shallow triangular texture is recommended when cavitation occurs; a textured side wall can reduce the maximum temperature of the seal face by about 10 °C.
Förderung
- the Zhejiang Provincial Natural Science Foundation of China
- the General Projects of the National Natural Science Foundation of China
- the Key Program of the National Natural Science Foundation of China
Zitieren
APA
Yu, M., Peng, X., Meng, X., Jiang, J., & Ma, Y. (2023). Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall. Lubricants, 11(9), 378. https://doi.org/10.3390/lubricants11090378
Vancouver
Yu M, Peng X, Meng X, Jiang J, Ma Y. Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall. Lubricants. 2023;11(9):378. doi:10.3390/lubricants11090378
BibTeX
@article{Yu2023,
author = {Yu, Minfeng and Peng, Xudong and Meng, Xiangkai and Jiang, Jinbo and Ma, Yi},
title = {Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall},
journal = {Lubricants},
year = {2023},
volume = {11},
number = {9},
pages = {378},
doi = {10.3390/lubricants11090378}
}
EUVIMED