EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Analysis of a Mechanical Seal with Equilateral Triangular Textured T-Groove

Guiyue Kou, Shan Jin, Qingliang Guo, Yuwei Ruan, Yanyan Yang, Peilin Li

Coatings · 11.08.2026 · 16 (8) · 951

DOI: 10.3390/coatings16080951 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 11.08.2026. Verfasst von Guiyue Kou und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangxi Provincial Natural Science Foundation, Science and Technology Research Project of the Jiangxi Provincial Department of Education, Nanchang Institute of Technology Doctoral Research Initiation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical seals in rotating machinery require sufficient liquid-film support while limiting leakage and temperature rise. This study proposes an equilateral-triangle-textured T-groove seal face and establishes a thermohydrodynamic CFD model incorporating cavitation to evaluate its lubrication and sealing behavior. The novelty lies in coupling equilateral triangular microtextures with T-grooves and assessing their combined effects on pressure generation, cavitation, thermal response, leakage, and film stability. The effects of medium pressure, rotational speed, film thickness, T-groove number, and texture depth were analyzed. The results show that the triangular textures and T-grooves jointly enhance local hydrodynamic pressure and load-carrying capacity. Higher medium pressure increases both load-carrying capacity and leakage, whereas higher rotational speed improves load support while reducing leakage. The maximum film temperature first increases and then decreases with medium pressure, peaking near 2 MPa. As film thickness increases, the load-carrying capacity reaches its maximum at approximately 8 μm, while the temperature and frictional coefficient decrease. Increasing the number of T-grooves improves load-carrying capacity and film stiffness but also increases leakage and machining complexity. Under the investigated conditions, 10–14 T-grooves provide a practical compromise among load support, leakage control, stiffness, and manufacturability.

Förderung

  • Jiangxi Provincial Natural Science Foundation
  • Science and Technology Research Project of the Jiangxi Provincial Department of Education
  • Nanchang Institute of Technology Doctoral Research Initiation

Zitieren

APA

Kou, G., Jin, S., Guo, Q., Ruan, Y., Yang, Y., & Li, P. (2026). Performance Analysis of a Mechanical Seal with Equilateral Triangular Textured T-Groove. Coatings, 16(8), 951. https://doi.org/10.3390/coatings16080951

Vancouver

Kou G, Jin S, Guo Q, Ruan Y, Yang Y, Li P. Performance Analysis of a Mechanical Seal with Equilateral Triangular Textured T-Groove. Coatings. 2026;16(8):951. doi:10.3390/coatings16080951

BibTeX
@article{Kou2026,
  author = {Kou, Guiyue and Jin, Shan and Guo, Qingliang and Ruan, Yuwei and Yang, Yanyan and Li, Peilin},
  title = {Performance Analysis of a Mechanical Seal with Equilateral Triangular Textured T-Groove},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {951},
  doi = {10.3390/coatings16080951}
}
Kostenlos starten →