Tribological Behavior of Ti-Coated Diamond/Copper Composite Coating Fabricated via Supersonic Laser Deposition
Lubricants · 11.05.2023 · 11 (5) · 216
DOI: 10.3390/lubricants11050216 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 11.05.2023. Verfasst von Qunli Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Zhejiang Provincial Natural Science Foundation, Science and Technology Project of State Grid Ningxia Electric Power Co., Ltd..
Abstract (Originalsprache)
Diamond/copper composite coating is promising for wear-resistant applications, owing to the extreme hardness of the diamond reinforcement. Ti-coated diamond/copper composite coatings with various laser powers were successfully fabricated employing the novel manufacturing technology of supersonic laser deposition (SLD). Ti-coated diamond, which was able to enhance the wettability between diamond and copper, was prepared at the optimal parameters via salt bath. Nano-spherical titanium carbides were uniformly distributed on the diamond’s surface to generate a favorable interface bonding with a copper matrix though mechanical interlocking and metallurgical bonding during impact. Furthermore, the results showed that the transition layer acted as a buffer, preventing the breakage of the diamond in the coating. SLD can prevent the graphitization of the diamonds in the coating due to its low processing temperature. The coordination of laser and diamond metallization significantly improved the tribological properties of the diamond/copper composite coatings with the SLD technique. The microhardness of the diamond/copper composite coating at a laser power of 1000 W reached about 172.58 HV0.1, which was clearly harder than that of the cold sprayed copper. The wear test illustrated that the diamond/copper composite coating at a laser power of 1000 W exhibited a low friction coefficient of 0.44 and a minimal wear rate of 11.85 μm3·N−1·mm−1. SLD technology shows great potential in the field of preparing wear-resistant hard reinforced phase composite coatings.
Förderung
- National Natural Science Foundation of China
- Zhejiang Provincial Natural Science Foundation
- Science and Technology Project of State Grid Ningxia Electric Power Co., Ltd.
Zitieren
APA
Zhang, Q., Chen, Y., Li, B., Wang, C., Wu, L., & Yao, J. (2023). Tribological Behavior of Ti-Coated Diamond/Copper Composite Coating Fabricated via Supersonic Laser Deposition. Lubricants, 11(5), 216. https://doi.org/10.3390/lubricants11050216
Vancouver
Zhang Q, Chen Y, Li B, Wang C, Wu L, Yao J. Tribological Behavior of Ti-Coated Diamond/Copper Composite Coating Fabricated via Supersonic Laser Deposition. Lubricants. 2023;11(5):216. doi:10.3390/lubricants11050216
BibTeX
@article{Zhang2023,
author = {Zhang, Qunli and Chen, Yiyun and Li, Bo and Wang, Changyi and Wu, Lijuan and Yao, Jianhua},
title = {Tribological Behavior of Ti-Coated Diamond/Copper Composite Coating Fabricated via Supersonic Laser Deposition},
journal = {Lubricants},
year = {2023},
volume = {11},
number = {5},
pages = {216},
doi = {10.3390/lubricants11050216}
}
EUVIMED