Tribological Properties of Diamond/Diamond-like Carbon (DLC) Composite Coating in a Dry Environment
Materials · 19.08.2025 · 18 (16) · 3879
DOI: 10.3390/ma18163879 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.08.2025. Verfasst von Chengye Yang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Chemistry, Petroleum and Chemical Industry Key Laboratory of Organic Electrochemical Synthesis, State Key Laboratory of Green C…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, National Natural Science Foundation of China, the Science and Technology Innovation 2035 Major Projects, Ningbo, China.
Abstract (Originalsprache)
In this study, a diamond/diamond-like carbon (DLC) composite coating was designed and fabricated utilizing a combination of chemical vapor deposition (CVD) and magnetron-sputtering-assisted ion beam deposition. This was designed to cope with severe problems such as high wear due to insufficient lubrication under dry sliding conditions with a single diamond. The tribological properties of the fabricated coatings under dry conditions were comparatively evaluated. The results demonstrate that the diamond/DLC composite coatings significantly enhance the tribological performance relative to their single-layer diamond counterparts. Specifically, a 33.73% reduction in the average friction coefficient and a 39.55% decrease in the average wear rate were observed with the MCD (microcrystalline diamond/DLC coating. Similarly, a 16.85% reduction in the average friction coefficient and a 9.69% decrease in the average wear rate were observed with the UNCD (ultrananocrystalline diamond)/DLC coating. Analysis of the worn track morphology and structure elucidated the underlying friction mechanism. It is proposed that the DLC top layer reduces the surface roughness of the underlying diamond coating and mitigates abrasive wear in the dry environment. Furthermore, the presence of the DLC film promotes graphitization via phase transition during sliding, which enhances lubricity and facilitates the establishment of a smooth friction interface.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Chemistry, Petroleum and Chemical Industry Key Laboratory of Organic Electrochemical Synthesis, State Key Laboratory of Green Chemistry Synthesis Technology, Zhejiang University of Technology, Hang…
- State Key Laboratory of Advanced Marine Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
ORCID-Profile: Xinbiao Mao
Förderung
- the National Key Research and Development Program of China
- National Natural Science Foundation of China
- the Science and Technology Innovation 2035 Major Projects, Ningbo, China
- the National Key R&D Program of China
- the Science and Technology Innovation 2025 Major Projects, Ningbo, China
- the National Natural Science Foundation of China
- the Key R&D Program of Shandong Province
- the National Key R&D Program of China
Zitieren
APA
Yang, C., Ou, Z., Mu, Y., Chen, X., Yang, S., Guo, P., Jiang, N., Nishimura, K., Mao, X., Song, H., & Li, H. (2025). Tribological Properties of Diamond/Diamond-like Carbon (DLC) Composite Coating in a Dry Environment. Materials, 18(16), 3879. https://doi.org/10.3390/ma18163879
Vancouver
Yang C, Ou Z, Mu Y, Chen X, Yang S, Guo P, et al. Tribological Properties of Diamond/Diamond-like Carbon (DLC) Composite Coating in a Dry Environment. Materials. 2025;18(16):3879. doi:10.3390/ma18163879
BibTeX
@article{Yang2025,
author = {Yang, Chengye and Ou, Zhengxiong and Mu, Yuanyuan and Chen, Xingqiao and Yang, Shihao and Guo, Peng and Jiang, Nan and Nishimura, Kazuhito and Mao, Xinbiao and Song, Hui and Li, He},
title = {Tribological Properties of Diamond/Diamond-like Carbon (DLC) Composite Coating in a Dry Environment},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3879},
doi = {10.3390/ma18163879}
}
EUVIMED