Multi-Objective Hull-Form Optimization of a Slender Submersible Surface Vehicle for Resistance and Vertical-Plane Maneuvering Stability
Journal of Marine Science and Engineering · 10.11.2026 · 14 (22) · 2136
DOI: 10.3390/jmse14222136 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 10.11.2026. Verfasst von Yuliang Wu und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic Research Program Project.
Abstract (Originalsprache)
Submersible surface vehicles (SSVs) must balance resistance in surface and fully submerged navigation while maintaining vertical-plane stability. This study develops a multi-objective hull-form optimization framework for a slender SSV using four free-form deformation (FFD) variables and 20 CFD design samples. Six low-order surrogate models predict surface and submerged resistance coefficients, displacement ratios, and two components of the vertical-plane stability criterion, Cv and Cvh. The combined criterion, Cstab=−(Cv+Cvh), is derived from the linearized heave–pitch equations using hydrodynamic derivatives obtained from CFD. The two components are modeled separately to examine their responses to hull-form variations. Model performance is evaluated using leave-one-out cross-validation (LOOCV), an independent baseline check, and high-fidelity recalculations. The three objective models achieve Q2 values of 0.9396, 0.9767, and 0.9818, respectively. Sensitivity analysis is conducted over a ±10% displacement-variation domain and a narrower ±1% feasible domain. Within the latter, stern vertical deformation accounts for 61.6% of surface-resistance variance, while the grouped longitudinal variables account for 81.7% of submerged-resistance variance. Five constrained NSGA-II runs yield 567 surrogate-predicted non-dominated designs. The selected compromise predicts reductions of 1.25% and 0.24% in surface and submerged resistance, respectively. Independent recalculation instead shows a 4.74% surface-resistance reduction, a 6.20% submerged-resistance increase, and a 2.60% increase in submerged displacement, exceeding the 1% limit. The stability-index prediction error is 6.53%. These results reveal mode-dependent geometric effects and highlight the need for further high-fidelity validation of the selected design.
Förderung
- Basic Research Program Project
Zitieren
APA
Wu, Y., Han, D., Wang, Q., Zhou, Z., Oderah, B., Zhao, W., Peng, X., & Jing, C. (2026). Multi-Objective Hull-Form Optimization of a Slender Submersible Surface Vehicle for Resistance and Vertical-Plane Maneuvering Stability. Journal of Marine Science and Engineering, 14(22), 2136. https://doi.org/10.3390/jmse14222136
Vancouver
Wu Y, Han D, Wang Q, Zhou Z, Oderah B, Zhao W, et al. Multi-Objective Hull-Form Optimization of a Slender Submersible Surface Vehicle for Resistance and Vertical-Plane Maneuvering Stability. Journal of Marine Science and Engineering. 2026;14(22):2136. doi:10.3390/jmse14222136
BibTeX
@article{Wu2026,
author = {Wu, Yuliang and Han, Duanfeng and Wang, Qing and Zhou, Zeyu and Oderah, Bashar and Zhao, Wangyuan and Peng, Xiao and Jing, Chongyang},
title = {Multi-Objective Hull-Form Optimization of a Slender Submersible Surface Vehicle for Resistance and Vertical-Plane Maneuvering Stability},
journal = {Journal of Marine Science and Engineering},
year = {2026},
volume = {14},
number = {22},
pages = {2136},
doi = {10.3390/jmse14222136}
}
EUVIMED