Multi-Objective Optimization of Bogie Stability for Minimum Radius Curve of Battery Track Engineering Vehicle
Applied Sciences · 17.06.2024 · 14 (12) · 5231
DOI: 10.3390/app14125231 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.06.2024. Verfasst von Yang Shen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hubei Province, a major project of the Indian broad gauge ballast shaping car key technology research and manufacturing.
Abstract (Originalsprache)
A battery track engineering vehicle faces challenges such as derailment and other safety concerns when navigating an R20m minimum radius curve, primarily owing to its low vertical and horizontal stabilities. To address these issues, a methodology integrating genetic optimization algorithms with a rigid and flexible coupled multi-body dynamics simulation is proposed to optimize the primary suspensions of the bogie of the vehicle. Initially, a multi-objective optimization model combining rigid and flexible coupled multi-body dynamics of battery track engineering vehicles with a genetic optimization algorithm was formulated. Subsequently, the optimal Latin hypercube design was applied to analyze the sensitivity of vertical and horizontal stability to various suspension parameters. Finally, a non-dominated sorting genetic algorithm (NSGA-II) and an archive-based micro genetic algorithm (AMGA) were applied to optimize the primary suspensions to enhance stability. Consequently, a set of optimal suspension parameter combinations was obtained. A notable enhancement was observed in the lateral stability of the optimized battery track engineering vehicles by 23.33% and in the vertical stability by 3.5% when traversing the R20m minimum radius curve, thereby establishing a theoretical foundation for further improving the running safety of railway vehicles and resolving the shortcomings of less research on the smallest radius curve.
Förderung
- Hubei Province, a major project of the Indian broad gauge ballast shaping car key technology research and manufacturing
Zitieren
APA
Shen, Y., Zhao, J., Wang, C., & Zhou, M. (2024). Multi-Objective Optimization of Bogie Stability for Minimum Radius Curve of Battery Track Engineering Vehicle. Applied Sciences, 14(12), 5231. https://doi.org/10.3390/app14125231
Vancouver
Shen Y, Zhao J, Wang C, Zhou M. Multi-Objective Optimization of Bogie Stability for Minimum Radius Curve of Battery Track Engineering Vehicle. Applied Sciences. 2024;14(12):5231. doi:10.3390/app14125231
BibTeX
@article{Shen2024,
author = {Shen, Yang and Zhao, Jiayi and Wang, Chongyu and Zhou, Minggang},
title = {Multi-Objective Optimization of Bogie Stability for Minimum Radius Curve of Battery Track Engineering Vehicle},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {12},
pages = {5231},
doi = {10.3390/app14125231}
}
EUVIMED