EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel T–U-Shaped Barge Design and Dynamic Response Analysis for Float-Over Installation of Offshore Converter Platform

Ping Li, Li Zhao, Mingjun Ouyang, Kai Ye, Rui Zhao, Meiyan Zou, Mingsheng Chen

Journal of Marine Science and Engineering · 19.10.2025 · 13 (10) · 2004

DOI: 10.3390/jmse13102004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 19.10.2025. Verfasst von Ping Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the current lack of specialized equipment for offshore wind platform installation and the unresolved challenges in deploying large offshore converter stations, this paper proposes a novel T–U-shaped barge for large offshore wind structures. First, a hydrodynamic model of the T–U-shaped barge is constructed and analyzed in ANSYS-AQWA. The influence of resonance occurring in the gap at the U-shaped stern on the frequency-domain model of the T–U-shaped barge is investigated. Subsequently, two installation configurations are examined: loading at the bow and loading at the stern of the T–U-shaped barge. This study comprehensively considers key components of the float-over installation system, including leg mating units (LMUs), deck support units (DSUs), fenders, and mooring cables. The results show that, for both installation schemes, the dynamic load distribution on each LMU evolves as the load-transfer stage progresses, and the sensitivity to wave period varies across different load-transfer stages, even under the same operating condition. This study evaluates the performance of the proposed T–U-shaped barge in the float-over installation of large offshore converter stations, demonstrating that its distinctive configuration endows it with strong functionality and provides valuable references for optimizing offshore wind-structure installation methods, as well as for the design and manufacturing of installation equipment.

Förderung

  • the National Natural Science Foundation of China

Zitieren

APA

Li, P., Zhao, L., Ouyang, M., Ye, K., Zhao, R., Zou, M., & Chen, M. (2025). Novel T–U-Shaped Barge Design and Dynamic Response Analysis for Float-Over Installation of Offshore Converter Platform. Journal of Marine Science and Engineering, 13(10), 2004. https://doi.org/10.3390/jmse13102004

Vancouver

Li P, Zhao L, Ouyang M, Ye K, Zhao R, Zou M, et al. Novel T–U-Shaped Barge Design and Dynamic Response Analysis for Float-Over Installation of Offshore Converter Platform. Journal of Marine Science and Engineering. 2025;13(10):2004. doi:10.3390/jmse13102004

BibTeX
@article{Li2025,
  author = {Li, Ping and Zhao, Li and Ouyang, Mingjun and Ye, Kai and Zhao, Rui and Zou, Meiyan and Chen, Mingsheng},
  title = {Novel T–U-Shaped Barge Design and Dynamic Response Analysis for Float-Over Installation of Offshore Converter Platform},
  journal = {Journal of Marine Science and Engineering},
  year = {2025},
  volume = {13},
  number = {10},
  pages = {2004},
  doi = {10.3390/jmse13102004}
}
Kostenlos starten →