EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study on the Dynamic Response of an Offshore Converter Platform with Integrated Equipment During Float-Over Installation

Zhenqiang Jiang, Weiwei Wu, Tianchai Wang, Zhenzhou Sun, Bo Zhang, Guohai Dong, Chunwei Bi

Energies · 28.10.2025 · 18 (21) · 5656

DOI: 10.3390/en18215656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 28.10.2025. Verfasst von Zhenqiang Jiang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major Scientific and Technological Project of Power China Huadong Engineering Corporation Limited, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the transformation of the global energy structure, offshore wind power is developing on a large scale, and the efficient and safe installation of offshore converter platforms has become a key technological bottleneck. Based on the elastic force–gravity similarity principle, a 1:65 model scale was adopted. A physical model of the offshore converter station platform was constructed, and the accuracy of the numerical simulation was validated by comparison with the physical model tests. This study investigates the dynamic response of the offshore converter platform and converter valve equipment during the float-over installation and mating process. The structural dynamic responses at key positions were analyzed. The results indicate that, due to the slender and flexible structure of the converter valve equipment, the Z-direction acceleration at the top is about 20% higher than that at the bottom. Moreover, the stress and strain at the bottom connection with the deck are higher than those at the top. The Y-direction acceleration at the edge foundation beam of the platform module is 47% higher than that at the mid-span position. The vibration frequency of the foundation beam on the first floor with the converter valve arranged is increased by 15%. When the jacket piles are subjected to impact, the mid-span response is 25% higher than that at the edges, showing characteristics of “strong at mid-span and weak at the edges”.

Förderung

  • Major Scientific and Technological Project of Power China Huadong Engineering Corporation Limited
  • National Key Research and Development Program of China

Zitieren

APA

Jiang, Z., Wu, W., Wang, T., Sun, Z., Zhang, B., Dong, G., & Bi, C. (2025). Numerical Study on the Dynamic Response of an Offshore Converter Platform with Integrated Equipment During Float-Over Installation. Energies, 18(21), 5656. https://doi.org/10.3390/en18215656

Vancouver

Jiang Z, Wu W, Wang T, Sun Z, Zhang B, Dong G, et al. Numerical Study on the Dynamic Response of an Offshore Converter Platform with Integrated Equipment During Float-Over Installation. Energies. 2025;18(21):5656. doi:10.3390/en18215656

BibTeX
@article{Jiang2025,
  author = {Jiang, Zhenqiang and Wu, Weiwei and Wang, Tianchai and Sun, Zhenzhou and Zhang, Bo and Dong, Guohai and Bi, Chunwei},
  title = {Numerical Study on the Dynamic Response of an Offshore Converter Platform with Integrated Equipment During Float-Over Installation},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {21},
  pages = {5656},
  doi = {10.3390/en18215656}
}
Kostenlos starten →