Enhancing Micro-Milling Performance of Ti6Al4V: An Experimental Analysis of Ultrasonic Vibration Effects on Forces, Surface Topography, and Burr Formation
Journal of Manufacturing and Materials Processing · 30.10.2025 · 9 (11) · 356
DOI: 10.3390/jmmp9110356 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 30.10.2025. Verfasst von Asmaa Wadee und 3 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The current study focuses on axial ultrasonic vibration-assisted micro-milling as an advanced technique to improve the machining performance of Ti6Al4V, a material whose difficult-to-cut properties present a significant barrier to manufacturing the high-quality micro-components essential for aerospace and biomedical applications. A full factorial design was employed to evaluate the influence of feed-per-tooth (fz), axial depth-of-cut (ap), and ultrasonic vibration on cutting forces, surface roughness, burr formation, and tool wear. Experimental results demonstrate that ultrasonic assistance significantly reduces cutting forces by 20.09% and tool wear by promoting periodic tool–workpiece separation and improving chip evacuation. However, it increases surface roughness due to the formation of uniform micro-dimples, which may enhance tribological properties. Burr dimensions were primarily governed by feed-per-tooth, with higher feeds minimizing burr size. The study provides actionable insights into optimizing machining parameters for cutting Ti6Al4V, highlighting the trade-offs between force reduction, surface texture, and burr control. These findings contribute to advancing ultrasonic-assisted micro-milling for industrial applications, namely aerospace and biomedical applications requiring high precision and extended tool life.
Zitieren
APA
Wadee, A., Nassef, M. G. A., Pape, F., & Maher, I. (2025). Enhancing Micro-Milling Performance of Ti6Al4V: An Experimental Analysis of Ultrasonic Vibration Effects on Forces, Surface Topography, and Burr Formation. Journal of Manufacturing and Materials Processing, 9(11), 356. https://doi.org/10.3390/jmmp9110356
Vancouver
Wadee A, Nassef MGA, Pape F, Maher I. Enhancing Micro-Milling Performance of Ti6Al4V: An Experimental Analysis of Ultrasonic Vibration Effects on Forces, Surface Topography, and Burr Formation. Journal of Manufacturing and Materials Processing. 2025;9(11):356. doi:10.3390/jmmp9110356
BibTeX
@article{Wadee2025,
author = {Wadee, Asmaa and Nassef, Mohamed G. A. and Pape, Florian and Maher, Ibrahem},
title = {Enhancing Micro-Milling Performance of Ti6Al4V: An Experimental Analysis of Ultrasonic Vibration Effects on Forces, Surface Topography, and Burr Formation},
journal = {Journal of Manufacturing and Materials Processing},
year = {2025},
volume = {9},
number = {11},
pages = {356},
doi = {10.3390/jmmp9110356}
}
EUVIMED