EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysing surface quality evolution and cutting forces in micro-milling of Ti6Al4V using experimental and machine learning approaches

Muhammad Rehan, Muhammad Sana, Muhammad Umar Farooq, Wai Sze Yip, Suet To

The International Journal of Advanced Manufacturing Technology · 2026-01 · 142 (5-6) · 2971-2989

DOI: 10.1007/s00170-025-17201-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 06.01.2026. Verfasst von Muhammad Rehan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In modern manufacturing, machine learning (ML) plays a crucial role in predicting response measures, reducing machining trial costs and saving energy. This study investigates surface evolution and cutting forces (F avg ) during the micro-milling of selective laser-melted (SLM) Ti6Al4V, focusing on spindle speed (SS), depth of cut (D OC ), and feed rate (F Z ). Analysis of variance (ANOVA) identified F Z as the most influential on surface roughness (Ra) of about 38.54% and D OC on F avg (42.16%). An artificial neural network (ANN) was trained to map the process-performance relationship, showing strong correlation with experimental results, thereby reducing material and resource costs. Additionally, a ML-based non-dominated sorting genetic algorithm (NSGA-II) was used for multi-objective optimization, achieving significant improvements in Ra and F avg by 335.61% and 592.61%, respectively, with optimal parameters of SS = 74,994 RPM, D OC = 19.94 μm, and F Z = 1 μm/tooth. Detailed analysis of F avg signals, tool wear, and surface evolution was conducted using scanning electron microscopy (SEM). The cumulative regression coefficient (R) for the ANN model is 0.99669, which demonstrates a strong correlation between the predicted values and the actual outcomes. The developed ML model will help the manufacturing industry by reducing the costs for materials, resources, and trial runs.

Zitieren

APA

Rehan, M., Sana, M., Farooq, M. U., Yip, W. S., & To, S. (2026). Analysing surface quality evolution and cutting forces in micro-milling of Ti6Al4V using experimental and machine learning approaches. The International Journal of Advanced Manufacturing Technology, 142(5-6), 2971-2989. https://doi.org/10.1007/s00170-025-17201-3

Vancouver

Rehan M, Sana M, Farooq MU, Yip WS, To S. Analysing surface quality evolution and cutting forces in micro-milling of Ti6Al4V using experimental and machine learning approaches. The International Journal of Advanced Manufacturing Technology. 2026;142(5-6):2971-2989. doi:10.1007/s00170-025-17201-3

BibTeX
@article{Rehan2026,
  author = {Rehan, Muhammad and Sana, Muhammad and Farooq, Muhammad Umar and Yip, Wai Sze and To, Suet},
  title = {Analysing surface quality evolution and cutting forces in micro-milling of Ti6Al4V using experimental and machine learning approaches},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {142},
  number = {5-6},
  pages = {2971--2989},
  doi = {10.1007/s00170-025-17201-3}
}
Kostenlos starten →