EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of Al6060/TiB2 Aluminum Matrix Composites Produced via Ultrasonically Assisted Stir Casting and Radial-Shear Rolling

Maxat Abishkenov, Ilgar Tavshanov, Nikita Lutchenko, Kairosh Nogayev, Zhassulan Ashkeyev, Siman Kulidan

Journal of Manufacturing and Materials Processing · 09.09.2025 · 9 (9) · 309

DOI: 10.3390/jmmp9090309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 09.09.2025. Verfasst von Maxat Abishkenov und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweight aluminum matrix composites with superior strength and structural integrity are in high demand for next-generation transportation and aerospace applications. In this work, Al6060-based composites reinforced with ≈2 wt.% TiB2 were produced using a hybrid processing route that combines ultrasonically assisted stir casting with radial-shear rolling (RSR). This strategy enabled uniform particle dispersion, strong matrix–reinforcement bonding, and substantial microstructural refinement (grain size 4–6 μm) with reduced porosity. Consequently, the Al6060/TiB2 composites demonstrated substantial gains over the as-cast alloy, combining a yield strength of 108.6 MPa, ultimate tensile strength of 156.9 MPa, and microhardness of 76.3 HV0.2 with a balanced ductility of ~9%. The demonstrated synergy of ultrasound-assisted casting and severe plastic deformation highlights a scalable pathway for fabricating high-performance aluminum composites, positioning them as promising candidates for aerospace, automotive, and other advanced engineering sectors.

Förderung

  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Abishkenov, M., Tavshanov, I., Lutchenko, N., Nogayev, K., Ashkeyev, Z., & Kulidan, S. (2025). Microstructure and Mechanical Properties of Al6060/TiB2 Aluminum Matrix Composites Produced via Ultrasonically Assisted Stir Casting and Radial-Shear Rolling. Journal of Manufacturing and Materials Processing, 9(9), 309. https://doi.org/10.3390/jmmp9090309

Vancouver

Abishkenov M, Tavshanov I, Lutchenko N, Nogayev K, Ashkeyev Z, Kulidan S. Microstructure and Mechanical Properties of Al6060/TiB2 Aluminum Matrix Composites Produced via Ultrasonically Assisted Stir Casting and Radial-Shear Rolling. Journal of Manufacturing and Materials Processing. 2025;9(9):309. doi:10.3390/jmmp9090309

BibTeX
@article{Abishkenov2025,
  author = {Abishkenov, Maxat and Tavshanov, Ilgar and Lutchenko, Nikita and Nogayev, Kairosh and Ashkeyev, Zhassulan and Kulidan, Siman},
  title = {Microstructure and Mechanical Properties of Al6060/TiB2 Aluminum Matrix Composites Produced via Ultrasonically Assisted Stir Casting and Radial-Shear Rolling},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {9},
  pages = {309},
  doi = {10.3390/jmmp9090309}
}
Kostenlos starten →