EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cradle-to-Gate Energy of Laser Powder Bed Fusion for Aerospace Titanium, Aluminium, and Magnesium Alloys: A Review

Oleksandr Hrushko, Mykyta Aikin, Volodymyr Kukhar

Journal of Manufacturing and Materials Processing · 14.11.2026 · 10 (11) · 510

DOI: 10.3390/jmmp10110510 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 14.11.2026. Verfasst von Oleksandr Hrushko und 2 weiteren Autor:innen. Die Arbeit nennt 150 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (L-PBF) is routinely presented as a sustainable alternative to conventional aerospace manufacturing, but its energy advantage is conditional and alloy-specific. We review the material and energy chain of Ti-6Al-4V, AlSi10Mg, Scalmalloy, WE43, and AZ91 and compare the cradle-to-gate primary energy of each with the conventional route it displaces. For titanium, the collapse of the buy-to-fly (BTF) ratio cuts primary energy by approximately 62% at a conventional BTF of 8:1 (49 to 72% when build specific energy consumption, SEC, and feedstock inventory vary together); machining-chip recycling narrows the saving. For aluminium, the case holds only for machining-intensive parts; measured industrial build energies support it, laboratory ones can eliminate or reverse it. For magnesium, published data show no cradle-to-gate advantage: casting already operates close to net shape, so Mg L-PBF must be justified on geometric or functional grounds. This conclusion rests on estimated build SEC; metered electricity SEC below about 33 to 39 MJ/kg against a 2:1 casting baseline, or 124 to 130 MJ/kg at 3:1, would reverse it. The evidence base is markedly asymmetric; titanium has been investigated in many independent reuse studies, but results for magnesium are described in a single WE43 study with no cycle-resolved AZ91 data.

Zitieren

APA

Hrushko, O., Aikin, M., & Kukhar, V. (2026). Cradle-to-Gate Energy of Laser Powder Bed Fusion for Aerospace Titanium, Aluminium, and Magnesium Alloys: A Review. Journal of Manufacturing and Materials Processing, 10(11), 510. https://doi.org/10.3390/jmmp10110510

Vancouver

Hrushko O, Aikin M, Kukhar V. Cradle-to-Gate Energy of Laser Powder Bed Fusion for Aerospace Titanium, Aluminium, and Magnesium Alloys: A Review. Journal of Manufacturing and Materials Processing. 2026;10(11):510. doi:10.3390/jmmp10110510

BibTeX
@article{Hrushko2026,
  author = {Hrushko, Oleksandr and Aikin, Mykyta and Kukhar, Volodymyr},
  title = {Cradle-to-Gate Energy of Laser Powder Bed Fusion for Aerospace Titanium, Aluminium, and Magnesium Alloys: A Review},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {510},
  doi = {10.3390/jmmp10110510}
}
Kostenlos starten →