EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Method to Assess Aluminium Alloy Machinability Using Shear Cracks in Chips Formed During Machining

Abdul Radim Asil, Nilam S. Barekar, Carla Barbatti, Dmitry G. Eskin

Journal of Manufacturing and Materials Processing · 11.11.2026 · 10 (11) · 500

DOI: 10.3390/jmmp10110500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 11.11.2026. Verfasst von Abdul Radim Asil und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UK Engineering and Physical Sciences Research Council, Constellium, Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Demand for aluminium (Al) products has increased due to their low density, high strength-to-weight ratio, thermal and electrical conductivity, and corrosion resistance. Reliable machinability assessment is important for selecting suitable alloys for manufacturing applications. However, conventional methods based on chip counting and weighing may not adequately distinguish alloys with similar chemical compositions. This study proposes an alternative method for assessing aluminium alloy machinability by quantifying the Shear Crack Initiation Layer (SCIL) in machining chips. Aluminium alloys were machined using a lathe under consistent machining parameters, and chip cross-sections were examined to quantify shear crack features and investigate differences between inner and outer chip layers. Conventional chip counting and weighing produced similar machinability values for two chemically similar alloys and showed negligible differences between the inner and outer layers of each alloy. In contrast, SCIL-based assessment revealed clear machinability differences between the inner and outer layers within each alloy and between the two chemically similar alloys. These findings demonstrate the potential of SCIL quantification to provide a more sensitive assessment of aluminium alloy machinability than conventional chip counting and weighing methods.

Förderung

  • UK Engineering and Physical Sciences Research Council
  • Constellium, Ltd.

Zitieren

APA

Asil, A. R., Barekar, N. S., Barbatti, C., & Eskin, D. G. (2026). A Novel Method to Assess Aluminium Alloy Machinability Using Shear Cracks in Chips Formed During Machining. Journal of Manufacturing and Materials Processing, 10(11), 500. https://doi.org/10.3390/jmmp10110500

Vancouver

Asil AR, Barekar NS, Barbatti C, Eskin DG. A Novel Method to Assess Aluminium Alloy Machinability Using Shear Cracks in Chips Formed During Machining. Journal of Manufacturing and Materials Processing. 2026;10(11):500. doi:10.3390/jmmp10110500

BibTeX
@article{Asil2026,
  author = {Asil, Abdul Radim and Barekar, Nilam S. and Barbatti, Carla and Eskin, Dmitry G.},
  title = {A Novel Method to Assess Aluminium Alloy Machinability Using Shear Cracks in Chips Formed During Machining},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {500},
  doi = {10.3390/jmmp10110500}
}
Kostenlos starten →