EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Role of Porosity in Mechanical Performance of 6061 Al Alloy Fabricated via Wire Arc Additive Manufacturing

Hang Zhang, Yong Song, Rongguang Li, Zhihao Zhao, Yuehong Zhang, Peijun Yang, Shanshan Li, Zehua Li, Jinghuai Zhang, Gaowu Qin

Journal of Manufacturing and Materials Processing · 03.11.2026 · 10 (11) · 482

DOI: 10.3390/jmmp10110482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 03.11.2026. Verfasst von Hang Zhang und 9 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shenyang University of Chemical Technology, Liaoning Provincial Key R&D Program Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, two distinct microstructural configurations were designed for wire arc additive manufacturing (WAAM) of 6061 Al alloy to elucidate the role of porosity in governing mechanical performance. The two samples exhibited contrasting porosity levels—an area fraction of 1.3% with an average pore size of 26.0 μm for one sample versus 3.4% and 29.8 μm for the other—while the low-porosity sample possessed coarser grains, higher dislocation density, and more densely distributed grain-boundary secondary phases, conventionally regarded as detrimental. Despite these unfavorable characteristics, the low-porosity sample had not only a higher ultimate tensile strength (183–190 MPa vs. 170–177 MPa) but also a substantially larger elongation (18.6–19.2% vs. 6.2–10.7%) and a drastically lower tensile anisotropy (3.2% vs. 42.1%). The elevated porosity of the high-porosity configuration introduced abundant stress concentration sites and provided preferential pathways for crack initiation and propagation, triggering premature fracture and severely curtailing the uniform plastic deformation stage. In contrast, the reduced porosity effectively suppressed crack nucleation, prolonged the uniform deformation stage, and fully compensated for the adverse effects of grain coarsening and secondary-phase coarsening. These results reveal a competing mechanism in as-deposited 6061 alloy, in which the ductility benefit of porosity suppression fully over-rides the classical detrimental effects of grain and secondary-phase coarsening, indicating that pore mitigation, rather than grain refinement, should be assigned the highest priority in the process optimization of WAAM Al alloys.

Förderung

  • National Natural Science Foundation of China
  • Shenyang University of Chemical Technology
  • Liaoning Provincial Key R&D Program Project

Zitieren

APA

Zhang, H., Song, Y., Li, R., Zhao, Z., Zhang, Y., Yang, P., Li, S., Li, Z., Zhang, J., & Qin, G. (2026). Role of Porosity in Mechanical Performance of 6061 Al Alloy Fabricated via Wire Arc Additive Manufacturing. Journal of Manufacturing and Materials Processing, 10(11), 482. https://doi.org/10.3390/jmmp10110482

Vancouver

Zhang H, Song Y, Li R, Zhao Z, Zhang Y, Yang P, et al. Role of Porosity in Mechanical Performance of 6061 Al Alloy Fabricated via Wire Arc Additive Manufacturing. Journal of Manufacturing and Materials Processing. 2026;10(11):482. doi:10.3390/jmmp10110482

BibTeX
@article{Zhang2026,
  author = {Zhang, Hang and Song, Yong and Li, Rongguang and Zhao, Zhihao and Zhang, Yuehong and Yang, Peijun and Li, Shanshan and Li, Zehua and Zhang, Jinghuai and Qin, Gaowu},
  title = {Role of Porosity in Mechanical Performance of 6061 Al Alloy Fabricated via Wire Arc Additive Manufacturing},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {482},
  doi = {10.3390/jmmp10110482}
}
Kostenlos starten →