EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Mechanical Properties, and Fatigue Resistance of an Al-Mg-Sc-Zr Alloy Fabricated by Wire Arc Additive Manufacturing

Lingpeng Zeng, Jiqiang Chen, Tao Li, Zhanglong Tuo, Zuming Zheng, Hanlin Wu

Metals · 01.01.2025 · 15 (1) · 31

DOI: 10.3390/met15010031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 01.01.2025. Verfasst von Lingpeng Zeng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jiangxi Province of China, China Postdoctoral Science Foundation, Qingjiang Excellent Young Talents of Jiangxi University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Al-Mg alloy wire modified by Sc and Zr additions was used to prepare a high-strength, non-heat-treated Al-Mg alloy component by wire arc additive manufacturing (WAAM) technology in the present work, and the microstructure, mechanical properties, fatigue resistance, as well as their anisotropies of the deposited Al-Mg-Sc-Zr alloy component were studied. The results show that the microstructure of the as-deposited alloy is composed of fine equiaxed grains with an average grain size of around 8 μm, and nanosized Al3(Sc, Zr) particles (~5 nm) are also evident. The tensile properties and fatigue resistance of the deposited alloy showed significant anisotropy, and the performance of the traveling direction is always better than that of the deposition direction. The ultimate strength, yield strength, elongation, and critical fatigue life (cycles) of the as-deposited alloy along the traveling direction (0° direction) are 362 ± 7 MPa, 244 ± 3 MPa and 24.8 ± 0.3%, and 1.72 × 105, respectively. The presence of weak bonding areas and high tensile (positive) residual stress between the deposition layers deteriorate the tensile properties and critical fatigue life of the sample along the deposition direction.

Förderung

  • Natural Science Foundation of Jiangxi Province of China
  • China Postdoctoral Science Foundation
  • Qingjiang Excellent Young Talents of Jiangxi University of Science and Technology
  • Graduate Student Innovation Fund Project of Jiangxi University of Science and Technology

Zitieren

APA

Zeng, L., Chen, J., Li, T., Tuo, Z., Zheng, Z., & Wu, H. (2025). Microstructure, Mechanical Properties, and Fatigue Resistance of an Al-Mg-Sc-Zr Alloy Fabricated by Wire Arc Additive Manufacturing. Metals, 15(1), 31. https://doi.org/10.3390/met15010031

Vancouver

Zeng L, Chen J, Li T, Tuo Z, Zheng Z, Wu H. Microstructure, Mechanical Properties, and Fatigue Resistance of an Al-Mg-Sc-Zr Alloy Fabricated by Wire Arc Additive Manufacturing. Metals. 2025;15(1):31. doi:10.3390/met15010031

BibTeX
@article{Zeng2025,
  author = {Zeng, Lingpeng and Chen, Jiqiang and Li, Tao and Tuo, Zhanglong and Zheng, Zuming and Wu, Hanlin},
  title = {Microstructure, Mechanical Properties, and Fatigue Resistance of an Al-Mg-Sc-Zr Alloy Fabricated by Wire Arc Additive Manufacturing},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {1},
  pages = {31},
  doi = {10.3390/met15010031}
}
Kostenlos starten →