Titanium-Based Binary (TiN/316L) and Ternary Nitride (TiAL(x:y)N/316L) Coatings Systems for Proton Exchange Membrane Fuel Cell Metallic Bipolar Plates
Journal of Manufacturing and Materials Processing · 03.11.2026 · 10 (11) · 479
DOI: 10.3390/jmmp10110479 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 03.11.2026. Verfasst von Syed Muhammad Arafat und 14 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The sustainable development of the world requires a cheap and sustainable source of continuous energy supply. Hydrogen fuel cells can be an effective solution, with proton exchange membrane fuel cells as a potential candidate for portable devices and electric vehicles. The bipolar plate is a critical component of proton exchange membrane fuel cells, with a large proportion of cost and weight associated with it. Binary and ternary metal nitride coatings can be applied on 316L for bipolar plate application to achieve better corrosion resistance, protection efficiency, interfacial characteristics, high power density and low-cost manufacturability. In this research work, alloy target-based novel ternary metal nitride coatings, i.e., TiAl(80:20)N, TiAl(70:30)N and TiAl(50:50)N, on 316 L substrate and a binary metal nitride coating, i.e., TiN, on 316L substrate are compared with bare 316L for bipolar plate material. Cathodic arc physical vapor deposition is used for the coating process, and the applied coatings are characterized by XRD, SEM and EDAX. The hydrophobic nature for coating water management ability is evaluated using a water droplet test. Open-circuit potential, potentiodynamic testing and electrochemical impedance spectroscopy are used for electrochemical corrosion characterization of the applied coatings. The maximum open-circuit potential is obtained for TiAl(80:20)N-coated 316L, which is ~27.4% higher than the second-highest TiAl(70:30)N-coated 316L. However, the Tafel extrapolation method indicates that the protection efficiency of TiAl(70:30)N-coated 316L is 15.76% higher compared to TiAl(80:20)N-coated 316L. For the application of bipolar plates, the ternary metal nitride coatings demonstrated superior performance under the tested conditions compared to both the binary metal nitride coating and bare 316L stainless steel.
Zitieren
APA
Arafat, S. M., Farooq, U., Farooq, A., Niazi, S. G., Usman, M., Hussain, M. T., Aslam, M. W., Qian, H., Zhang, T., Hayat, N., Qureshi, M. A. M., Uddin, G. M., Alshehri, A. S., Hayat, Q., & Chaudry, U. M. (2026). Titanium-Based Binary (TiN/316L) and Ternary Nitride (TiAL(x:y)N/316L) Coatings Systems for Proton Exchange Membrane Fuel Cell Metallic Bipolar Plates. Journal of Manufacturing and Materials Processing, 10(11), 479. https://doi.org/10.3390/jmmp10110479
Vancouver
Arafat SM, Farooq U, Farooq A, Niazi SG, Usman M, Hussain MT, et al. Titanium-Based Binary (TiN/316L) and Ternary Nitride (TiAL(x:y)N/316L) Coatings Systems for Proton Exchange Membrane Fuel Cell Metallic Bipolar Plates. Journal of Manufacturing and Materials Processing. 2026;10(11):479. doi:10.3390/jmmp10110479
BibTeX
@article{Arafat2026,
author = {Arafat, Syed Muhammad and Farooq, Umer and Farooq, Ameeq and Niazi, Sajawal Gul and Usman, Muhammad and Hussain, Muhammad Taha and Aslam, Muhammad Waqas and Qian, Hua-Ming and Zhang, Tingyu and Hayat, Nasir and Qureshi, Muhammad Asif Mahmood and Uddin, Ghulam Moeen and Alshehri, Abdulelah S. and Hayat, Qamar and Chaudry, Umer Masood},
title = {Titanium-Based Binary (TiN/316L) and Ternary Nitride (TiAL(x:y)N/316L) Coatings Systems for Proton Exchange Membrane Fuel Cell Metallic Bipolar Plates},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {11},
pages = {479},
doi = {10.3390/jmmp10110479}
}
EUVIMED