Microstructure Validation of Graph Theory Model-Derived Cooling Rates in the Wire Arc Additive Manufacturing of ER70S-6 Steel
Journal of Manufacturing and Materials Processing · 28.07.2026 · 10 (8) · 269
DOI: 10.3390/jmmp10080269 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 28.07.2026. Verfasst von Mark Anderson und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Energy (DOE), Office of Science, Nebraska Nanoscale Facility: National Nanotechnology Coordinated Infrastructure, Nebraska Research Initiative.
Abstract (Originalsprache)
Wire arc additive manufacturing (WAAM) enables high-rate fabrication of large metallic components, but spatial variations in thermal history can lead to microstructural heterogeneity that requires efficient process models to evaluate. This study evaluates whether cooling rates extracted from a graph theory model (GTM)-based thermal simulation are consistent with the microstructural evolution observed in an ER70S-6 WAAM wall. Thermal histories from the model were analyzed at selected build heights, and cooling rates were extracted from the final thermal excursion through the austenite phase field. Microstructures at corresponding locations were characterized using electron backscatter diffraction (EBSD) to quantify grain size distributions, and pearlite interlamellar spacing was used as an additional indicator of cooling behavior. The modeled cooling rates were highest near the substrate and generally decreased with build height, consistent with the observed reduction in the fine grain fraction and the progressive shift in the grain size distribution as build height increased. Pearlite spacing trends also supported the modeled cooling rate variation. These results indicate that GTM-derived thermal histories can be post-processed into metallurgically meaningful cooling rate estimates for WAAM steel builds and linked to dataset specific empirical grain size distribution relationships for process–thermal history–microstructure assessment.
Förderung
- Department of Energy (DOE), Office of Science
- Nebraska Nanoscale Facility: National Nanotechnology Coordinated Infrastructure
- Nebraska Research Initiative
- Los Alamos National Laboratory at the Electron Microscopy Laboratory
Zitieren
APA
Anderson, M., Piercy, N., Cole, K., Rao, P., Suryakumar, S., & Shield, J. E. (2026). Microstructure Validation of Graph Theory Model-Derived Cooling Rates in the Wire Arc Additive Manufacturing of ER70S-6 Steel. Journal of Manufacturing and Materials Processing, 10(8), 269. https://doi.org/10.3390/jmmp10080269
Vancouver
Anderson M, Piercy N, Cole K, Rao P, Suryakumar S, Shield JE. Microstructure Validation of Graph Theory Model-Derived Cooling Rates in the Wire Arc Additive Manufacturing of ER70S-6 Steel. Journal of Manufacturing and Materials Processing. 2026;10(8):269. doi:10.3390/jmmp10080269
BibTeX
@article{Anderson2026,
author = {Anderson, Mark and Piercy, Nicholas and Cole, Kevin and Rao, Prahalada and Suryakumar, Simhambhatla and Shield, Jeffrey E.},
title = {Microstructure Validation of Graph Theory Model-Derived Cooling Rates in the Wire Arc Additive Manufacturing of ER70S-6 Steel},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {8},
pages = {269},
doi = {10.3390/jmmp10080269}
}
EUVIMED